Hello guys,

I am back with another build of Mikey's rc Sport Trainer made of 6mm depron enforced with boom sticks and steel wires.

Specs
Crappy CF-2812 1534kv Motor
ESC - Another crappy 20amp ESC
Prop - 7*4
Battery - 11.1v 1850mah 3S

I would like to ask you if you would like to point out any problems with this homemade plane and would also like to ask you how to mount this motor because i cant find such a small driver to screw out the screws in the motor mount

Here are the pics,Maiden still left to do until i am completely confident-

BUMP!

@priyum the model looks ok but u need to make certain correction since u r a beginner -
1. Add glider type balancers on both sides of the wings (it helps a lot in balancing the plane when u have poor control)
2. Tie up the wires and make it neat coz u dont wanna damage ur electronics during an uneventful crash
Please put some good resolution pics of the motor mount section so that we can have a look at it .

fuse seems to be toooooo thin... re enforce by bamboo or some stick

also stablizer is small in proportion....

This was one of my first scratchbuilt foamie. It isnt really forgiving in terms of nose first impact.

Make sure you have just a little dihedral .