hey guys i am having my diwali vacations and i wanted to start on a project as i have lot of surplus left after space shuttle project
that is
4 different turnigy 3 cell lipos = 2200x1 and 2650x3
about 10-15 different sized servos
3 ducted fan but it is still kept for space shuttle project but as i am planning to reduce its weight i think i can use one or two max
3x 40 amp esc's
two 222w motors as the vtol projects prototype ver.air4b is now about to start and about 7 to 8 props
and my futaba 6ch tx is there tooo
please help me find a plane which i can fly with the edf or the http://www.r2hobbies.com/proddetail.php?prod=rcps81518_p (http://www.r2hobbies.com/proddetail.php?prod=rcps81518_p)
i want a plane which i could build in one day and setup the electronics on the second day
subbu
Quotei want a plane which i could build in one day and setup the electronics on the second day
:o let me see if can find anything or build a profile 3D model
very very very good build
http://www.rcgroups.com/forums/showthread.php?t=1124466 (http://www.rcgroups.com/forums/showthread.php?t=1124466)
subbu
well if i am going for edf this one is good i have built many planes from here
http://www.parkjets.com/free-plans.html (http://www.parkjets.com/free-plans.html)
subbu
Why not do something origninal with your own ideas.... Here are a few that I could think of
1, Dihedral on demand - Can change dihedral during flight
2, Sweep on demand - Can change the wing sweep angle on flight
3, Or may be something like a transformer... ;).. I am thinking of a plane that could curl its fuselage on to itself so that it could land like a rolling donut.. Just a concept no solid design realized yet.
Subbu, its time to improvise and I am sure you have the skill.
-Ismail
THANKS FOR THOSE WORDS my brain has stared its thinking process.
thanks a lot
subbu