RC India

Dear modellers. Many of you must be owing beginner plane like. Easy star I , Easy star II and Skysurfer.  All these planes are considered best for beginners, and they are very good at glide also. All i am in need is their Exact Dimensions. each side each part. like

Leading edge of wing from the nose tip.
Chord of wings at junction and at tip.
polyhedral tip raised in cms ( when wing is rest on plane surface)
length from propeller to leading edge of the ver. stab.
Horizontal stab. length and elevator width and length.
Vert. stab width and lenth. rudder dimensions .
Fuse height and width at junction of both wings
  and any other comes to your mind.

Please specify the model name and then the dimensions.

Will be a graet help.

Thanks
  Manoj Sharma.

i got some dimension of easy star wen on internet. hope this will help you .

some more :-\

Thanks a lot Satish.  :salute:

Expecting more  for  SKYSURFER also. please...

great help.. expect more builds.. {:)}

Quote from: swizera on May 29, 2012, 09:57:21 AM
Dear modellers. Many of you must be owing beginner plane like. Easy star I , Easy star II and Skysurfer.  All these planes are considered best for beginners, and they are very good at glide also. All i am in need is their Exact Dimensions. each side each part. like

Leading edge of wing from the nose tip.
Chord of wings at junction and at tip.
polyhedral tip raised in cms ( when wing is rest on plane surface)
length from propeller to leading edge of the ver. stab.
Horizontal stab. length and elevator width and length.
Vert. stab width and lenth. rudder dimensions .
Fuse height and width at junction of both wings
  and any other comes to your mind.

Please specify the model name and then the dimensions.

Will be a graet help.

Thanks
  Manoj Sharma.

Manoj

What do you want these dimensions for?

may be for building from other material  ;D, that is good

Quote from: vineet on May 29, 2012, 11:41:43 PM
may be for building from other material  ;D, that is good

Right .

http://www.rcindia.org/beginners-zone/easy-star-54'-clone-plans-!/msg103752/#msg103752

Thanks for the link satish. From the pics in above i Have measured all the dimensions.

thanks  :hatsoff: :hatsoff: :hatsoff:

Here are the dimensions for Easystar.  Nearly same. all dimensions are in Inches. May help to others.

Dear SATZ ... thanks a lot on the easy star dimensions.
Appreciate the efforts.
Saurabh

 :)

hi..axn floater or shikra ..which is good beginner plane?

Thank you so much... I am also going to build a pusher glider inspired by sky surfer... but its a spad...just not getting time to get the Coro for the build...

was anyone able to make an easy star clone with these dimensions

Yes, it has been done somewhere in RC india but i dont remember who has made it. I was a HD Thermocol model if I remember correctly

http://www.rcindia.org/electric-planes/scratch-building-a-look-alike-of-axn-floater-or-fms-800-or-easystar/ (http://www.rcindia.org/electric-planes/scratch-building-a-look-alike-of-axn-floater-or-fms-800-or-easystar/)

http://www.rcindia.org/electric-planes/building-hd-thermacol-sky-surfer/ (http://www.rcindia.org/electric-planes/building-hd-thermacol-sky-surfer/)