Was having unused vinyl sheets lying around......Thought of transforming the appearance of my High Winger Electric Trainer purchased from Mr. Sandeep....
Here is the Original version....
And here comes the transformed version.....
Some more pics......
And some more..... :)
That looks great.... {:)} {:)}
Can you pls give the dimensions and components used
Thanks Pranav... :)
The model was made by Mr. Sandeep (username: sbajare). The specs are as under:
Material: Ply Coro composite
Fuselage: 760 mm
Wingspan: 1140 mm
Wings with dihedral
Wing chord: 180 mm
Motor: Turnigy 2826/8 1100kv from hobbysea.com
ESC: Hobbyking 30 Amps
Prop: 9x5 from hobbysea.com
Battery: Wolfpack 11.1 v 2200 mah from RCbazaar.com
Landing Gear: DIY (I replaced the stock landing gear)
For more details you can see the post by sbajare -
http://www.rcindia.org/electric-planes/laser-cut-imported-ply-kits-with-coro-covering/
regarding landing gear
it is aluminum or carbon fibre
kp
It is made out of aluminium flat.
tell me how
i am also working on same
kp
Your assembly of the components looks precise and cool colour combination. :thumbsup: :hatsoff:
Please give some more close pics of tail and electronic assembly.
I shall put the details od Landing gears by evening....please bear till then....
Thanks Pranav....I shall post the pics by evening today....
again sir
give me ur phone no
or give brief detail of landing gear
specially landing gear frame and its axle
kp
reply sir
reply sir
especially
landing gear frame and its axle where to procure the same
kp
Extremely sorry for not being able to answer your query yesterday...
@ Kamalsahai...I have created another post under building techniques....you can go through that.....
http://www.rcindia.org/tools-materials-and-building-techniques/diy-landing-gear-and-tail-wheel/
@ Pranav...I have created another post under building techniques....you can go through that.....
http://www.rcindia.org/tools-materials-and-building-techniques/diy-landing-gear-and-tail-wheel/
I once again apologise for the delayed response.......
Since the Landing Gear is a subject itself....thought of covering that in a separate thread in detail......Hope you won't mind.....