As promised but not as good as I wanted 

https://www.youtube.com/watch?v=flZDwinVzJg&list=UUmmiZyCcnF9rorZ7Ek16meg

Pics attached after some on the spot paint job too.

Nice build sam.
Manojlikeyourspad 

Really good. Keeping doing

Thanks dears :-)

samstilllikesspad!!! 


Super-duper buddy! Keep them going high 

Please share the modifications you have done from the original STTB plans and the full specs

  Great going Sam!

Thanks dears Didnt wanted to quit building that easily

Now about the changes, well actually its very little. You could find a few pics in the beginning of this thread (the first one I built few years back) showing the tail mods.

I kept the Elev span the same but increased the cord for more surface while Rudder was completely changed to resemble a 3d plane. On the other hand, the wing was slightly modified too. The span is 48" (bit shorter to help with rolls compared to the stock 52") while the cord is slightly more ( 12" plus 2.5" AIL).
I have tried to avoid use of wood as much as possible to reduce overall weight. The only pieces used are lite ply...

1. Motor mount 3mm lite-ply firewall, 2. two pieces sandwiched for LG mount with bottom plate covered with fiber glass cloth. 3. Both ELEV halves have a piece of Ply joining the in a "V" shape, small pieces of lite ply on the AIL. Couple of places, I have used 4mm barbecue skewers through 4mm coro (behind the battery and just behind trailing edge of wing) for structural strength. Since the plane is not with me, I could not take any pics to illustrate the mods. I could do this next time when I see him if required.

  great work sam

Thanks dear

Sorry, I missed the "full specs"

Electron Burner: Turnigy G46 670kv
Prop: Master Airscrew 12x8
ESC: Plush 60A
Servos: HK STD cheapies
LG: Custom 1" aluminum I brought from Kerala