Finally got back to a large electric conversion .
The reason I say got back is because that is where I started Electric RC from ( Great Planes PT 60 ) conversion .
Sharma Model Ace is a great Highwing trainer Manufactured by Sharma Models right here , mind you it is not one of the cheap stuff you get around .
It has a FRP Fuse and a Balsa Wing covered very professionally and designed to take quite a beating .
It is more in line with the Kyosho Calemento but far more rugged and capable of lifting good payload.
Normally flown with a 0.46 + engine this bird is a beauty .
My Set up :
I Flight 4120/700 KV Motor ( could do with a 3520 motor but my plans for her is to be some sort of a heavy lift vehicle )
I flight 60 amp ESC with external BEC
Gens Ace 14.8 V 6200 mah Battery
APCE : 14 x 8 Prop
Hitec 225 HB Servos x 4 ( the original has a single servo for the Ailerons but I personally prefer independent servos hence the Mod.)
Converted from Tricycle to Tail Dragger.
Video :
http://youtu.be/7vPr6Ki945c
(Should be live soon )
Sai
How would the performance be on a 3536 960 KV Brushless? And what would be a good battery to use in that case?
the 3536 will be too small a motor for this model as it is a 2814 eq.
What I am talking of here is http://rc4all.co.in/product_info.php?products_id=512
I go with is a Gens Ace 4 S 6200 mah + planning to up it to 8000 mah
Sai