Entry for 2015 Sweepstake, Light Combat Aircraft , Scratch Build , foam +coro

Started by sauravbhadauria, June 17, 2015, 04:26:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

sauravbhadauria

June 17, 2015, 04:26:34 PM
Hi all
         , i have done some scratch building but i am not a neat finisher  ;D....

Trying my hands on LCA ,Tejas.

My dad was a test pilot on it and recently he had asked me to scratch build a fighter aircraft. hence i chose Tejas.

I havent been flying rc planes  for a long time before this i flew 5 years back and that was the first time and then i went on to do my civil pilot training. i have applied in airlines and i have ample amount of free time :D...

  it has just been about 2 months since i got back to the hobby all thanks to Gaurav Agarwal Sir ( Allahabad). i started off with VT all rounder and then VT speedster from his online store. both planes helped me get back to the hobby fast. Recently i got a .52asp nitro plane.

for the present build

I will probably be using

2826/14 1400KV Brushless Motor
3 9g servo
30amp esc
3s lipo
coro sheet
Foam ( left overs from gauravA sirs place :D)

sauravbhadauria

#1
June 17, 2015, 04:35:57 PM
day one build

sauravbhadauria

#2
June 18, 2015, 02:27:26 PM
Day 2 morning

sauravbhadauria

#3
June 18, 2015, 09:01:18 PM
Day 2 evening
Delta wing slot CNC cutting on fuselage thanks to Gaurav sirs workstore.   

topalle

#4
June 19, 2015, 10:19:21 AM
Nice build sir,
Subscribed....
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

sauravbhadauria

#5
June 19, 2015, 02:07:44 PM
Day 3 morning

sauravbhadauria

#6
June 19, 2015, 02:12:15 PM
Servo and rudder work today.

Still confused about the canopy. Should I sand foam and do it or use a bottle ... I have to put my battery , Rx as fwd as possible.
Any suggestions for canopy and nose construction

sauravbhadauria

#7
June 29, 2015, 08:53:36 PM


Maiden flight

K K Iyer

#8
June 29, 2015, 10:47:24 PM
A nicely short video, just long enough to prove it flies.
Well done. (Both build and video) {:)}

sanjayrai55

#9
June 30, 2015, 05:28:29 AM
Very nice  {:)}

Very nice to see Mr. Iyer active too ;)

wingmanbunty

#10
June 30, 2015, 08:31:25 AM
 {:)} :goodjob:
EAT ,SLEEP , FLY

sauravbhadauria

#11
June 30, 2015, 02:53:51 PM

shobhit17

#12
June 30, 2015, 03:23:12 PM
Excellent first flight..... was great to witness it last Sunday.  Congratulations
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

sundaram

#13
June 30, 2015, 03:54:30 PM
Excellent Flight  {:)} {:)}

docnayeem

Re:
#14
June 30, 2015, 04:27:40 PM
Great maiden... Congratulations

sanjayrai55

#15
June 30, 2015, 06:06:36 PM
Nice flying, great maiden!  {:)} {:)}

Where exactly is this flying field?

sauravbhadauria

#16
June 30, 2015, 07:15:33 PM
This is at phaphamau airfield . Allahabad

sanjayrai55

#17
June 30, 2015, 07:25:34 PM
OK! Actually you had written you are based in Delhi so was wondering....

sauravbhadauria

#18
June 30, 2015, 07:46:52 PM
Usually I am around Delhi only.. Presently here for a year ornso.. :) would love to meet you in gurgaon and learn from you.  Have seen all your nitro coro build..just superb ...

bmblb

#19
July 04, 2015, 07:23:17 PM
Quote from: sauravbhadauria on June 30, 2015, 07:15:33 PM
This is at phaphamau airfield . Allahabad

nice flight Saruav ! coro + foam works great - what do you use to bond them?
"The Flight Of The Bumblebee"

sauravbhadauria

#20
July 04, 2015, 08:33:05 PM
Sir I used bondtite . super strong
Print
Go Up Pages1
User actions