Hi,
I'm in the process of building a foamy from 3mm EPS sheet. The wing span is about 700mm and i expect that the model should be max around 300gms minus any electronics. Plan to use 3 gm servos for this.
Any idea what motor, esc and battery would be a good choice? I have a BL 2204, 7.4v 2S 850 mAH lipo.
Also, any lightweight RXs that may be suitable?
Quote from: tg on August 13, 2009, 01:18:56 PM
I have a BL 2204, 7.4v 2S 850 mAH lipo.
Also, any lightweight RXs that may be suitable?
well you have the ingredients just buy a 10 amp esc and for a light weight rx please give us details of your tx
and anyway rx's are light
these days i believe for a 6ch 72 mhz a gws rx is the lightest i know
subbu
The weight of the models without the set up touching 300 gms for a foamy seems an over estimation TG.
I would put it at closer to 200 gms.
Yes AUW 300 gms should be OK with a 2204 set up .
My fox and the Bigger Mr MOSS fly 2204 with AUW around 250 - 300 gms.
As for receiver I use a 4.3 gms Assan Rx on the Fox ;D
You can lighten any receiver for that matter by taking off the cover and using the circuit
sai