ETOC MX2 Indoor 3D Build Thread..

umayash1 · December 27, 2013, 04:27:12 PM

Hi,
Starting a new Thread For ETOC MX2 Indoor 3D (Competition Air-frame), Airplane Will gonna build totally from Scratch using 3mm Depron..
As I am already flying an old overweight Star EPP that I still have.
The aim is to build something that flies a lot slower, to make it easier to fly in Indoor Areas.
I would imagine that planes intended for F3P-AM would suit my needs.

The equipment I have available is as follows:
Motor: Turnigy 3020 Brushless Outrunner Motor 1800kv
Prop: GWS EP-8040 (5.3g)
Receiver: FrSky 5ch Ultra light Rx.
Battery: Turnigy nano-tech 460mah 2S 25~40C Lipo Pack
Esc: SkyWalker 20A

umayash1 · December 27, 2013, 07:46:57 PM

Some Progress.. $:-\$

umayash1 · December 27, 2013, 07:47:59 PM

More..

umayash1 · December 27, 2013, 08:36:27 PM

...

umayash1 · December 27, 2013, 08:37:25 PM

Now that's what it looks Like.. Still Needs More Finish..

umayash1 · December 27, 2013, 10:10:42 PM

.....

K K Iyer · December 27, 2013, 10:27:36 PM

A work of art in under 5 hours!
Must come to Bhopal and visit.

umayash1 · December 27, 2013, 11:39:18 PM

Thank You So much Sir..

umayash1 · December 28, 2013, 04:24:20 PM

Some More Progress..

aman1256 · December 28, 2013, 04:27:10 PM

These are great pics

umayash1 · December 28, 2013, 04:39:45 PM

Some Pictures of this Airplane from International Events..

umayash1 · December 28, 2013, 08:33:00 PM

Progress..

umayash1 · December 29, 2013, 04:25:39 AM

Ok Its 04:30 now and finally the whole kit is Ready now..
Time to fix it and Put some Carbon rods..

umayash1 · December 29, 2013, 04:35:09 AM

The real reason for making this plane is to Learn Air-Brush painting Techniques, this was Actually my first try..
Whole Paint is done using simple Locally available Spray Paints..

manojswizera · December 29, 2013, 12:29:18 PM

Which spray you used Umayash. please name some or some pic.
It doesn't eat your depron ?

umayash1 · December 29, 2013, 02:08:37 PM

@ManojSwizera:- Here is your Answer:-

No Need to use any Imported Foam Safe Spray paints,
Use any type of Spray paint Which is locally Available Like AeroSol etc.
But only After Watching This video.

manojswizera · December 29, 2013, 04:13:37 PM

Great Umayash

thank you for the .

umayash1 · December 29, 2013, 10:24:00 PM

Update..

umayash1 · December 29, 2013, 10:24:58 PM

..

K K Iyer · December 29, 2013, 10:46:10 PM

@umayash1
I presume you got these fine results by masking and spraying from 1 foot or so away.
Can't believe you did it from 11.8 inches as the video took over 4 minutes to say!

umayash1 · December 30, 2013, 02:02:03 AM

Some more Progress..

umayash1 · December 30, 2013, 02:03:48 AM

Putting it together..

umayash1 · December 30, 2013, 02:05:58 AM

Installing Carbon Fiber reinforcement Rods..

vishal · December 30, 2013, 04:21:42 AM

very nice build

aman1256 · December 30, 2013, 11:47:22 AM

It is a great build sir and very cute too!!!