RC India

Hi,
Starting a new Thread For ETOC MX2 Indoor 3D (Competition Air-frame), Airplane Will gonna build totally from Scratch using 3mm Depron..
As I am already flying an old overweight Star EPP that I still have.
The aim is to build something that flies a lot slower, to make it easier to fly in Indoor Areas.
I would imagine that planes intended for F3P-AM would suit my needs.

The equipment I have available is as follows:
Motor: Turnigy 3020 Brushless Outrunner Motor 1800kv
Prop: GWS EP-8040 (5.3g)
Receiver: FrSky 5ch Ultra light Rx.
Battery: Turnigy nano-tech 460mah 2S 25~40C Lipo Pack 
Esc: SkyWalker 20A

Some Progress.. :-\

More..

...

Now that's what it looks Like.. Still Needs More Finish..

.....

A work of art in under 5 hours!
Must come to Bhopal and visit.

Thank You So much Sir..

Some More Progress..

These are great pics :)

Some Pictures of this Airplane from International Events.. :)

Progress..

Ok Its 04:30 now and finally the whole kit is Ready now..
Time to fix it and Put some Carbon rods.. :thumbsup:

The real reason for making this plane is to Learn Air-Brush painting Techniques, this was Actually my first try..
Whole Paint is done using simple Locally available Spray Paints..

Which spray you used Umayash. please name some or some pic.
It doesn't eat your depron ?

@ManojSwizera:- Here is your Answer:-

No Need to use any Imported Foam Safe Spray paints,
Use any type of Spray paint Which is locally Available Like AeroSol etc.
But only After Watching This video.

http://www.youtube.com/watch?v=eBABqYL8GLg#ws (http://www.youtube.com/watch?v=eBABqYL8GLg#ws)

Great Umayash  {:)}
thank you for the .

Update..

..

@umayash1
I presume you got these fine results by masking and spraying from 1 foot or so away.
Can't believe you did it from 11.8 inches as the video took over 4 minutes to say!

Some more Progress..

Putting it together..

Installing Carbon Fiber reinforcement Rods.. :thumbsup:

very nice build  {:)} {:)} {:)}

It is a great build sir and very cute too!!! :)

Thank You..

Very nice build.

Thank you very much Nitesh..
Hope to see a good build thread in future by you with a nice airplane..

Have made two planes but not flown one also due to lack of elecs so waiting for the elecs.

All the Carbon fiber rods Installed..

hey yash nice build there.... :thumbsup:

cant wait for vids  (:|~ (:|~

whts the diameter of the CF rods your using for this model ???



regards

Hi, M using 1.5mm for wing and 1mm for Fuse reinforcement..

Under Carriage and Skid..

...

And Finally..

 :thumbsup: :thumbsup: :thumbsup: Impressed with your Spray Paint Work.  {:)} {:)}

Thank You Sir.. Just trying..

Superb :)

Same Design.. 8-)

Badhe miya tou Badhe miya....chote miya subhanAllah...... :thumbsup:

Yeah Exactly... Lolzz..

http://www.youtube.com/watch?v=RTGUCP43GcM#ws (http://www.youtube.com/watch?v=RTGUCP43GcM#ws)

http://www.youtube.com/watch?v=IGPBCOnY_ag#ws (http://www.youtube.com/watch?v=IGPBCOnY_ag#ws)

Aileron Servo...

Plans Attached.. If anyone want to build..

Great Tanmay  :hatsoff: :hatsoff: , wants to see on next sunday on field (:|~ (:|~ (:|~

Thank You dada..

@umayash1
What's the AUW? 150gms?
If so 2.5 oz/sqft?
Best i've managed is 6.5 for Magic, 6 for Spitfire and 4.95 for small bipe.
Have your MX2 plan, have 3mm depron.
Inspired by your build to attempt under 3 oz/sqft.
What is the current draw?
My 350 mah 2s batteries (ex Nine Eagles) can't do 3amps.
And my next size 2s is 1300mah, 70gms.
What do you suggest? Better 350 battery?
Will use Donkey ST2004+10A Esc combo.
Eagerly await video.

@Iyer Ji:-
AUW is around 170 Grams, Also used 3mm Depron in whole model..
Current draw is around 7A, 46Watt input power swinging 8X4SF Prop with 2S Setup..
Motor is SK3 2122 1800Kv 55W Outrunner..
And for Donkey ST2004-1550kv, 350Mah Won't do..  
2S 460Mah 25-40C (30Gms) would be a better choice and will give you much better flight time with a 8" Prop under 6A..
Will Upload the Video Soon..

@umayash1
Thanks.

Another Scheme in making for another 34" Version.. ;)

ol Done.. Ready to Print..

Very nice and inspiring build log.
Great Job  :hatsoff:

Thanks..

Here Is the Video.

Watch In HD.

www.youtube.com/watch?v=DH9HmhcZiiY (//http://) (//http://)

Awesome Plane Awesome Flying   :thumbsup:

Lovely plane & amazing flying skills too .  :thumbsup:

Nice flying and your flying field is large  >:D, hard to find such places in Hyderabad. It's interesting to see how you hold the radio, do you use pinch and thumb or how do you move the sticks ?

Some Water Spashing Fun With MX2
Watch In HD.
www.youtube.com/watch?v=hBJXS_aXwKk (//http://)

@Sahilkit- Thanks, And Sorry I havn't seen your reply. I use stick Pinch All time. It doesn't matter how you hold the Radio, it's better to maintain that style always. Changing the holding way of radio and stick again and again is a pain, Specially when you are doing precison Flying.

Thanks for the reply, i'm finding pinch and thumb with neck strap more comfortable  :)

Sahil

MX2 Indoor Hanging..

Watch In HD

www.youtube.com/watch?v=zuQg6RC31jY (//http://)

Tanmay,
Youtube says 'This video is not playable'

nice video, its working for me.

Thats A really Good Plane. Really Like It.
Regards,
Aman.:)

Awesome *claps*

amazing....  :hatsoff: :hatsoff:

Thanks.

www.youtube.com/watch?v=eELxvsKxjIE&feature=youtu.be (//http://)

Once Again So Good!!!!
Regards,
Aman.:)

Hi,

Do you have plan for this model?
What is all up weight?
Which glue do you use for depron?

@Spitfire:- See Reply#43, AUW is 160 Grams, I Use 5min Rapid Epoxy Mostly.

Great! Thanks!!