F22 in corro for RcIndia 2015 sweepstakes

Started by kiran rc, July 24, 2015, 08:31:07 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kiran rc

After the corro spitfire, thought to build a minj jet. The F22!
Specification:
3mm corro
Wingspan-25inch
18 gram avionics motor
20amp esc
3cell 500mah lipo
8 inch sf prop

kiran rc

Started the build. Cutting out the main frame from 3mm corro.

kiran rc

Completing the fuse. Stuck everything with superglue.

kiran rc

Covering the bottom frame.

kiran rc

Tail fins added. (Vertical stabilizer) model is all set for mounting the electronics! :thumbsup:

kiran rc

Decals added ;D.

kiran rc

Added the servos.

manojswizera

Beautiful build kiran. it will fly great.
Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

kiran rc


kiran rc

Landing gear made from cycle spoke.Used balsa to stick it on. :thumbsup:

kiran rc

Motor mount.

kiran rc


kiran rc

Pushrods installed.  :thumbsup:

kiran rc

Making the canopy lock. The pieces lock into the frame.

kiran rc

The corro jet is all set for it first maiden flight :thumbsup:

b4ggu

Kiran a very good looking Jet indeed...Good luck for its maiden!!
Deepak

kiran rc

 :thanks: Deepak sir, I will try to maiden it tomorrow if its not pouring down. ;D

sanjayrai55


a3ruz

 {:)} Great Build Kiran  :hatsoff: looking good . Good luck for its maiden!!
It's all about beging in air
CT6B | HK Bixler | APM | S550 | Tarot XYZ M | Turnigy 9x | Naza M V2 | Phantom 2 | Phantom 4 | Taranis X9D+ | F450 | ZMR250 | Naze | Omnibus | Martian II | Airypix | Airytek | Drone Racers Kerala

kiran rc

Thank you Sanjay sir.  :hatsoff: Didn't measure the auw but should be light ,with in 250-300 grams.

kiran rc


rcrcnitesh

Sooooooo good.....
Awesome build bro.
Maker | Aeromodeller | Teenager

kiran rc


kiran rc


vishalonline