Text only | Text with Images

RC India

RC Models => Electric Planes => Topic started by: sharlock on May 12, 2015, 12:03:13 AM

Title: F3P model build ZINNIA
Post by: sharlock on May 12, 2015, 12:03:13 AM
Hi all,

Its been some time I have been working on indoor F3P model, after many changes n modifications now finally I have started building the model will post the pics soon...
Title: Re: F3P model build ZINNIA
Post by: sharlock on May 13, 2015, 03:59:21 PM
Ready for paint job
Title: Re: F3P model build ZINNIA
Post by: sharlock on May 14, 2015, 01:26:40 PM
Painted & ready for assembly, need to add CF rods for reinforcement, these will be added during the time of construction.
Title: Re: F3P model build ZINNIA
Post by: sahilkit on May 15, 2015, 07:50:50 AM
nice, are you going to use reinforcements and post info on power setup.
Title: Re: F3P model build ZINNIA
Post by: sharlock on May 15, 2015, 11:34:31 AM
Yes I am using 1mm CF rod for the reinforcement of fuselage, will post the pics as soon as it gets ready. Setup is as usual for a normal F3P plane 2s lipo 250mah, servos are 4 grams micro, motor is 1900KV, propeller 9x4. I will be using my JR 2.4 radio, like I said this is strict only designed for indoor F3P precision aerobatics sequence flying.
Title: Re: F3P model build ZINNIA
Post by: sharlock on May 18, 2015, 02:26:13 PM
All done except motor & servo installation.
Text only | Text with Images