Flying wing with Openaero2 Auto flight stabilization

docnayeem · January 12, 2016, 10:25:59 PM

Build log.

Material:
Biofoam 8mm
Teak wood 5mm spars
Coro
Biofoam cut for Kfm aerofoil

docnayeem · January 12, 2016, 10:28:57 PM

Wing assembly with spars in place and central box

docnayeem · January 12, 2016, 10:30:01 PM

Lower half covered with masking tape

docnayeem · January 12, 2016, 10:31:40 PM

Completed the masking tape covering

docnayeem · January 12, 2016, 10:33:08 PM

Central box covering made in coro

docnayeem · January 12, 2016, 10:33:59 PM

docnayeem · January 12, 2016, 10:36:23 PM

KK board flashed with Openaero2 placed at the CG

v2 eagle · January 13, 2016, 08:51:22 AM

refer this Doc:

first video is common for all.

docnayeem · January 13, 2016, 10:08:35 AM

Thanks a ton Ashok Sir

bmblb · January 13, 2016, 10:39:05 AM

Super

rastsaurabh · January 13, 2016, 12:08:24 PM

Super Built Nayeem.
Is the Folding prop OK in pic...... shouldn't it fold the other way?

I think Wings are catching up in the Quad world. Easy to built & fly.
My wing..... Nayeem Note we have used the same motor

.... I did rewinding on mine.
http://www.rcindia.org/for-sale/wing-core-made-of-high-density-thermacol/msg245153/#msg245153

v2 eagle · January 13, 2016, 12:27:00 PM

http://www.rcindia.org/chatter-zone/fixed-wing-stabilization-with-kk-2-0-board/msg214120/#msg214120

my original thread about KK and open aero, was crazy about it by then. forgot most of it now!!.

docnayeem · January 13, 2016, 03:18:40 PM

Finally completed

Himadri Roy · January 13, 2016, 10:50:34 PM

Nice build doc even I am building the same!

And OpenAero has made Flying Wing so easy to fly for begineers like me!