got my soaring eagle  today just wanted to ask sai uncle whether he mounted the motor inside the fuse or outside the fuse as there were no assembly instructions inside

I rerversed the shaft and mounted the motor inside the motors  I have used is a hyperion 2208/ 1350 kv. And now changed it to a 2212/ 1400 kv with a 8040 prop if you find that difficult then use the motor on the out side but don't forget to use the mount sitffner that come with the kit as otherwise the firewall area is not stiff enough and induces vibration in the motor
Sai

which  battery did you use 3s or 2s as i am planning to use 3 S

 2 s. 1300 mah but depends on the motor and prop though

I received my Soaring Eagle Too, I request Sai sir to upload the pics of soaring eagle after the motor mount, as this wil help the newbie like me.

Muzammil.

Here are come Photos of the Motor mounted on the soaring eagle .
Flew her on 3 S last week end that was as great as the 2 S version but I still feel  the climb rate on take off on a 2 S is more controlable for a beginner.
Here are  some photos of the motor mounting , I hope this will explain

We flew the Raptor using an FY 21 AP.


It was  a great flight .

Sai

Hi,
Booked 2 nos IR Cessna. Paid on Friday 12 O'clock and packed and prepared for dispatch within same day and confirmed me that it may delay for consecutive holiday of Sunday and 15th august. However, after tracking, seen that it come to near my house on 14th (within 7KM ) and I got it today evening (16th Aug). Excelent information from SAI and continuous feedback.

The packaging is excellent (water proof nearly) and pictures posted. A few pictures of the plane itself also given for feedback of packaging.

From the materials contents and electronics, it is seen that as the IR heli comes within 600, the mini cessna will go down to 400Rs. or less with the mass order.

Another point of interest is that, the two pager motor, one IR sensor, one 90mAh LiPO is sufficient with mini prop and wheel. There are many programmers here who can make this tiny plane circuit with Tx. The cost will be very less than Planturico. Of course, 4 Ch planes needs pico actuators.

Sai uncle can add 6 NiMH cell with a charger to make it a really RTF. I am planned to use 1600mAH NiMH low discharge cells which comes to me 3 cell pack = Rs.70/-. and a Charger. This may be optional. I have already charger with individual autocut facility.

More Photos.

And my charger. The battery pack need to be opened and separated for the Tx.

Soaring eagle , Cessna indoor and a Biplane ( http://www.ebay.in/itm/Micro-BiPlane-782-2CH-Electric-RTF-RC-Airplane-/110771822590?pt=LH_DefaultDomain_203&hash=item19ca83dffe )  are Back in stock.

Sai

Hello Sai sir,
I'm interested in buying the soaring eagle and the electronics required for it.. I'm planning to go with the beginner combo 2 servos set up - which seems to have all the electronics required for the plane - including the 2212/10 1400kv motor... should i proceed with it?
This will be my first rc set up..