hi!
i was watching flitetest the other day, and i was wondering if i could adapt the same models to coro... so here it is !!!
this is currently pics and plans of the power pod....
i will be designing the rest later....
the current electronics are:-

EMAX CF2822
2200mah LiPo
3x9g servo's
35A esc





and heres the link to the plan... please note you will have to scale it yourself... i have given 1 measurement on it to scale it to...

https://www.dropbox.com/s/ux6buazr46uq15x/swappablhke.png


any modifications welcome!
thanks!
aniket

Innovative. Please post some more details. Have you started building one? Have you thought of a quick release system to mount and dismount it from the model?

@ VC, yes, there will be two holes, and dowels will be passed through them....these dowels can also be used to hold the wings in place....

Ankeet nice..  I was thinking the same and made a power pod last week of coro similar design.. now making the fowl flyer kind of model using coro... started two days before.. expecting to finish it by this week.. will post pics then...

All the best ... I am using 2x 2mm coro sandwitched..

Sent from my Canvas using tapatalk 2

@arun cool! post some pics now only!

I had made one for Nitro Corro models some years ago. The OS 46 (or 55) sat in along with the fuel tank & throttle servo with push rod, and the nose wheel & it's steering gear. The assembly slid out, and was fastened from the side with self tapping screws. Made of 2 mm ply, with 6 mm firewall and glass filled nylon engine mount.

Only problem I faced was that the corro fuse (4 mm) varies in size, depending on which flute it folds along!

It's good if you plan to keep half a dozen corro models, and use a single power pod

^ i am planning that only
it also helps when one has to do a sitrep on the electronics after a crash...

any updates