Here's the specs-
hextronik 24 g 1300kv outrunner
10 amp esc
2s 900 mah lipo
9 g servos
rcb6i
8*4 prop(should i use a 9*5 )
auw-300g
Gonna maiden it today

its looking cool
try it up with ailerons and large wings

what motor and esc you use in your mini scout

emax gt2203( though i suggest a  1806 2280kv from quadkopters) and hk 10 amp esc

A 9*4.5 seems to be more appropriate for your plane ....
Moreover ... you could have made it cheaper
Wish you luck for your maiden flight

sir will hte 9 4.5 burn the 10 amp esc
how could i have made it cheaper
thank you

thanks sir
but where can i get hk 10 amps esc

U can find it on hobbysea

Check here for 10 Amp ESCs
http://www.vibranthobbies.com/planes-parts/speed-controllers/hobbyking-escs.html/?vh_esc_current=187

What material did you use for the firewall? Everytime I fly my Flyer, I either end up breaking a firewall (Acrylic) or a prop  
Also where can I find the suitable wire for making the landing gears?

For the firewall I have successfully used copper clad board that is used in making PCBs

can send pics how you made the fuselage

Hello Everyone,
Nice Plane
Regards,
Aman.