Hello guys,
I went to sitaram stationers as Mr. sanjayrai55 had suggested and got 5mm depron from there.
Going to build Two FT Flyers from a single sheet. Will get electronics from Singapore in may.
I complete my studies in the morning so i have the whole day free. I made a huge progress on the first day.
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Will complete it tomm. and post pics till eve.
Almost all of the electronics from rotor hobby,Singapore.
Best of luck Prabal, really looking forward for some pics.
There is some prob. They arent getting on the site. I have compleated the whole structure
and am waiting eagerly to go to singapore..
I think you could get the electronics cheaper here in Mumbai ;D
You can get the electronics as an combo offer from vibrant hobbies;
http://www.vibranthobbies.com/combo-offer/for-air-planes/power-pack-for-ft-swappable-series.html (http://www.vibranthobbies.com/combo-offer/for-air-planes/power-pack-for-ft-swappable-series.html)
Hey,
NEWS i was too impatient and bought the electronics from the link suggested. Thanks vibrant hobbies.
The electronics are right now in the FEDEX office. Will arrive by evening. :)
You are welcome.
Please post in your progress on the build in this thread.
If you have any comments on the combo offer please do not hesitate to inform us, so that we can correct it.
Hey vibrant hobbies,
THE PACK IS AWESOME. It comes wonderfully pack and all parts are totally secured.
I would suggest you also add batteries and Cheap tx and rx packs to your websites so that everybody can buy all of the components at your shop. It is very hard ordering from 5 different websites.
Otherwise the pack is awesome. I would like to post photos of the build but the images arent getting uploaded.
Thanks for your appreciation.
TX/RX needs WPC Approval and we are struck in that process.
We will stock batteries as per the requirement and you can post your requirements in this thread.
http://www.rcindia.org/wanted/wishlist-from-hobbyking-!/ (http://www.rcindia.org/wanted/wishlist-from-hobbyking-!/)
Hello,
I also ordered the rcb-6i from RC bazaar.com on preorder. And i also ordered an 3s 11.1V 20C LI-PO and XT 60 Connector from kinetichobbies.com
Will make a video of the pics and upload on youtube as images arent getting uploaded
Hey guys!!New updates. The battery with Xt60 connectors arrived today!!!
RCB6i expected to be delivered in may... 1st week.
On the battery .. GOOD JOB... KINETIC HOBBIES ROCKS....😉😉😉😉😆😆😆😆👌
Nobody replying ..... i think no ones intrested 😢😢😢😢😢😢😢😩😩😩😩😩😳😳😳😳😳
Who told no one is interested??? It`s just that we are all saving our energy so that we can post a detailed message when the build finishes!!!!
All the best buddy;D:-*:-*:);)
THANKZZZ.....
Goind to solder xt 60s on the battery and esc....
Awaiting shipment of preordered rcb6i from rc bazaar in 1st week of may..
My F.a s are going on........... had hindi yesterday and on tue i have science.
Why did these F.a s come. 9 th std. Fa s are then comparebly easy
Info for all depronies. The AUW weight comes around 250 gms.including electronics and battery..*
*excl. Prop😬😬😬😬😬😬😆😆😆😆
hey,
I ran into a biiiiiiiiiig problemmmm.
As you know that apc props have a very large central section around the hole for mounting it on the motor.
My motor came with a prop saver and the length of the screws is less than the dia of the central part of the prop...
When i fit the prop on the saver and then on the motor the prop is noticed to be lose when i
spin the motor by my hand then the prop corrects itself into a straight pitch but a lower rotations sometimes it goes wobbly
on the pitch....
HELP MEEEEEEE
Plzz replie!!
Nobody interested in helping me out???
it will be more convenient for people to help you if you attach clear pictures of your build, propeller and propeller saver.
so it doesn't mean no one is ready to help you.
The images arent getting uploaded!! I can mail them to you if you want
Now a big hassle to get a prop for my plane. >:( >:( :( :banghead: :banghead: :banghead:
WELL DONE VIBRANT HOBBIES :salute: :salute: :salute: {:)}
Our private message to OP
Sorry, We missed your question !
Use different propeller such as this
http://www.vibranthobbies.com/planes-parts/airplane-accessories/propellers/gws-ep-propeller-rd-8043-203x109mm-green-3pcs-set.html (http://www.vibranthobbies.com/planes-parts/airplane-accessories/propellers/gws-ep-propeller-rd-8043-203x109mm-green-3pcs-set.html)
Also, we noted the problem and removed the APC propeller from the combo offer.
reply by member
My money???
It has been wasted on a prop i cant fly with. It would be good of you send that pair
Of propeller Bang Head Bang Head Angry Angry Angry
my build is getting delayed.
IS THIS ATTITUDE BY THE MEMBER IS RIGHT ?
Sir ,
Then what about the 300 rs. I spent on the prop....
I apologise for the rude behaviors
You could atleast arrange for a return....
My sincere apologies.... not meaning to offend.... once again apologise
Hey rcb 6i will be dilevered in 1 hour....
will fly tomm. Morning.
maidened it today!!!!!!!!!
guess what?????
NOSE DIVE AND A BROKEN PROP!!!! :(
Did u check the CG?
Yup.
Today it flied great. Thanks madaquif. But it banked after 5 secs and went inverted and then the prop slipped from the saver (still rotating :)) and cut through the starboard leading edge
.
Hey .
flied it once again ..... flew good for 10 sec . Straight but as i turned the rudder to the portside, it turned a bit and went inverted .... broke the moter mount,power pod.
Hey,
I followed the advice of a rcgroup member....
it was to reduce throws and increase expo...
The model flew great...
Will share a utube link tomm.
congrats my friend :thumbsup:....hope it felt awesome to see your own creating fly like a bird ;D
yes...
Now for all : https://www.youtube.com/watch?v=c5QD3QDz4eI
use HD ;)
HeY this is the flight video of the ft flyer:
https://www.youtube.com/watch?v=c5QD3QDz4eI
REFER TO MY BUILD THREAD
Congrats!
Add a little weight (plasticine) to the nose to improve stability.
Best of luck.
Thanks.. will do what u suggested