Main Menu

FT Nutball

Started by sanjayrai55, October 27, 2013, 07:10:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

sanjayrai55

Built a FT Nutball. My wife promptly said it looks like a Ladybug!

prateek13

Looks good!
The stripes are vinyl stickers?
Couldn't help but notice the FT Baby Blender in the background!
Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D

sanjayrai55

Crashed on maiden  >:D >:D

The wing folded along the centre-line in mid-air while doing a steep fast climb. Highly overpowered - 2826-1400KV on a 360 gm all-up-weight.

But the real problem according to me was I used 'biofoam' which did not have the backing paper on both sides.It was brittle, and just not strong enough. Repair was easy, will put some reinforcement and start again  ;D ;D

sanjayrai55

Prateek, I used Coloured thin packing tape!

sanjayrai55

1 hour marking  :banghead:, 1 hour build, 1.5  hours electronics & controls

I filched the power pod from the Baby Blender - swappable means you got to swap  :giggle: :rofl:

prateek13

For the non covered biofoam they best way maybe putting clear packing tape on the whole surface to give it a little rigidity and fibre tape at joints, control surfaces and cuts etc.
Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D

VC

Where did the pilot and the cockpit come from?
Growing old is mandatory, growing up is optional!

sanjayrai55

Keen observation as usual VC sir  :salute: :salute:

Had the pilot lying around for some years. The cockpit is from some kitchen stuff that came in a vacuum formed card pack  ;D. I generally purloin such stuff and stash away  ;) ;)

aniket210696

is that cockpit a jelly container? :P ;)

Sent from a potato using a lamp - now mashed
.

romanxdsouza

Quote from: sanjayrai55 on October 27, 2013, 07:24:51 PM
1 hour marking  :banghead:, 1 hour build, 1.5  hours electronics & controls

I filched the power pod from the Baby Blender - swappable means you got to swap  :giggle: :rofl:
sir this is a beauty to fly in small areas mines had an motor wire issue,like the pilot concept on yours .once the cg is located it flys great . i put clear tape all around the edges of the circle dint get a chance to rip then was thinking of getting back to it ....let see

sanjayrai55

Oh, it flew just fine.

But the wing centre was weak, and it could not take the load of some basic maneuvers. Anyway, repaired it, let's see this weekend  ;) ;D

abhayf14


sanjayrai55


sanjayrai55

The repair took around 20 minutes, just some hot glue & packing tape  ;D

Here's a video taken today

http://www.youtube.com/watch?v=39LLi5Xflf0&feature=c4-overview&list=UUQhf5Pkzb8t7lzTwN0AIYEw

Quite a fun little UFO  :rofl:

romanxdsouza


VC

Growing old is mandatory, growing up is optional!

aman1256

Very Very Very cute sir :)

utkarshg13

 :thumbsup: :thumbsup: :bow: :bow:
This model is so cute... and flies easily in less space. very good finishing... :thumbsup: :thumbsup:
The pilot in the cockpit looks cool...
"If you were born with wings, do every thing you could, for flying."

sanjayrai55