Hey guys 
started my scratch build project for sweepstakes it will be a slow flyer as i badly needed one so here the build log

Started on 6th and completed today evening will paint tonight and post the updates till then enjoy the build photos 

p.s I am really thankful to nithin for his valuable suggestions 

Regards
yash 


           

PART I:
Plans printed out and taped

PART II:
cut out of the plans and pinned on foam board
i am using laminated biofoam 5mm

PART III:
All part traced on biofoam and cut off
assembled the fuse and wings

Planes almost ready waiting for my electronics from HK

Cute 

Nice
Are you using laminated deprton then you need to use a more powerfull setup as the thing is very heavy.

nitesh its only 300g and overall will be max 500g so no weight issue as i had with hal ht2 talking sanjay sir's advice of using less hot glue  thankyou sanjay sir 

'Fir to Asmaan ko fadh do'

May I know the ordered electronics from HK ?
I am curious to know it because I am building a FTflyer and about to order electronics from HK

Quote from: yash10896 on April 09, 2014, 01:17:14 AM
Planes almost ready waiting for my electronics from HK

For the FT Flyer I am using this combo
Avionics 2212 micro motor
2s 1300mah battery
20amp esc
8*4 prop
8.5 gram emax servo

@rcparkjets
sir i already have the motor but it needs a mount thats on it way and one 2s battery is also on its way
i am using
2730 1300kv motor
20A esc
1300mah 2S 25-50c nano-tech
1nos hxt900
1nos avionic 27g servo

PART IV:
wings attached and painted the body 

Frame is just 312g and total AUW will be around 410g where my motor will produce 440g of thrust so good 1:0.9 thrust to weight ratio best for slow flyer

I don't think anyone consider it as an interesting build but i love this plane cause it's an old timer  

Anyway here are the landing gears i have done today did experiment with alloy,plastic and normal steel wire but this looked and appealed best  

Some closeups

there are very few pics of the model with newspaper in the ending stage of build( no offence intended). if you have it please post it sir, it will get you more chance of winning

@topalle
if i started with the tracing of plan on foam on 8th and posted final pics on 11th isn't it clear that it would have completed in that time gap only