Recently bought Ft spear wing kit from Vortex rc.
Thanks a ton for their superb job, making sandwich foam available in india. and laser cutting these kits.
Now about the particular kit.
The quality is awesome, very well packed,receive in good condition.
all these sheets are packed and shrink wrapped.
tried to clicks some pics.
Joint the two halves of the wing,
spars were attached to make the wing stronger.
center spar is attached make the center section stronger.
motor mount is glued in,
center plate is made,
hatch made for electronics accessibility
servos and push rods are attached
Decals are attached, came along the kit.
wing completed.
Greetings Sir,
Did you use hot glue for this airplane ?
Yes raghuram
entire build was using hot glue.
Was it necessary to sand the surface or u were able to apply hot glue on it just the way it was?
Sent from my iPad using Tapatalk
No sanding was required aanishp.
just applied the glue on existing surface.
Nice! which electronics setup r u using?
Nice, Manoj. Now where's the video? ;D
@ topalle.
1500 kv e-flite motor,
50 A esc.
9050 prop
Sanjay sir video coming soon.
Here is a small launching video. my friend toss it .
https://www.youtube.com/watch?v=fHdd2ScmtcE
Great launch! Your friend has lots of courage ;)
Thanks sanjay sir , i also have lot of courage. I also launch the same way ;D
:rofl:
Just saw the thread, and loved to see Manoj build and fly our SPEAR Speed Build kit !
Gratifying to see our models built up and flown.. Thanks for sharing pics and videos.. Now look for many more videos/FPVs and pictures !
Way to go !!!
Thanks Gaurav sir,
Indeed you have taken great steps and pain in making the material and kits available in india.
and Flite test team for making such good designs.
here is another video from today's flying
https://www.youtube.com/watch?v=7-UA7mhachk&feature=youtu.be