Hi Guys,
It's been a longtime since i was last active on forum's.
It took the life out of 3 FT Nutballs before I get the one Perfectly build and balanced. This 1 was quick to teach me how to fly an Rc plane and nothing has bothered me since then. Next I went on building the beginner series from Flitetest and have been flying them for months. All being intact as they were built.
Now moving onto the Intermediate Series I have recently built FT Versa (It has quite a sizeable wingspan compared to the previous planes, looks beautiful) which is ready for its maiden flight this weekend.
Also I have completed building Wings for the next Plane FT Spitfire but I have messed it up. Ideally the Airfoil is flat on its bottom while the upper camber is having all the curves and peaks. But mine looks like a symmetrical airfoil, upper and lower camber of which looks alike.
It was after i joined both of the wings together and was about to make the fuselage when I noticed this error.
You can see the difference from the image attached.Left one is the ideal Airfoil while right one is what I got.
(http://s25.postimg.org/416rpwwjf/IMG_20150703_083027.jpg) (http://postimg.org/image/416rpwwjf/)
(http://s25.postimg.org/al9jw9akb/DSC_0145.jpg) (http://postimg.org/image/al9jw9akb/)
(http://s25.postimg.org/gjnd6htiz/DSC_0149.jpg) (http://postimg.org/image/gjnd6htiz/)
I'm not sure what would be the effect of using this wing :headscratch: and so would request for suggestions from the veterans out here.
Second one is the FT Versa, beautiful isn't it?;D
Don't worry, it'll fly just fine.
Quote from: K K Iyer on July 03, 2015, 05:35:23 PM
Don't worry, it'll fly just fine.
Thank You Iyer Sir, I'll go ahead with it.:D
I'll post the results once it is done. ;D