Made servo holder using 3mm balsa.

Looking very nice plane Kiranbhai
Without electronics, it must be very light weight.

Quote from: taitil on July 19, 2015, 11:18:09 AM
Looking very nice plane Kiranbhai
Without electronics, it must be very light weight.

Thankyou! yes quite light,maybe around 150gram without electronics

Added the servos and pushrods. 

Some more.

Making the rear cover. Flat piece of corro is folded by creasing the folds. Formers are added for holding the structure and strengthening.

Attached the rear cover.

Nice job and decals   Kiran u can use smaller battery if you have for maiden, as 2200 mah is  heavy  200 grams

Thanks!  The AUW is not going to be around 200gram. It may weigh around 400 gram. 

Ok. Todays progress. Made the turtledeck.

Great Work...!!

Thanks Vishal.

Looks neat !!! Nice build Kiran 

Thanks Praveen sir

Kudos to Kiran! This is a fine build: Corro is not as easy to work with as depron/foam/balsa.

Really well done! 

Quote from: sanjayrai55 on July 22, 2015, 05:02:48 PM
Kudos to Kiran! This is a fine build: Corro is not as easy to work with as depron/foam/balsa.

Really well done! 

Thank you Sanjay sir. This is my first corro model.

Very very good.

Made the canopy using balsa and plastic sheet.

Haha, i was just going to ask you that!
Well done 
A well deserved pat on the back from our Master Coro Builder.

More pictures 

Quote from: K K Iyer on July 22, 2015, 07:48:21 PM
Haha, i was just going to ask you that!
Well done 
A well deserved pat on the back from our Master Coro Builder.

Sure ! Thankyou

nice plane, simple canopy design{:)}

Thanks jana

I flew it today and lots of wind.The wind speed was around 25-30 Km/h.

Seems tail heavy