I have been wanting to get back into the hobby for a while now
So , I decided to make Blu Baby 33" primary trainer and modified the plans
The reason I am noy making a FliteTest plane because , first, I always wanted to build a Blu Baby , and second , I am a bit sick of seeing FT designs everywhere (not that i hate them )
So here is the setup :
A2212/10t 1400kv
8 inch slow fly prop ( can't remeber the pitch)
Wolfpack 30a esc
Wolfpack 1000mAH LiPo
2x Towerpro metal gear servos
RZ6 receiver
PROBLEM
I decided to make the undercambered airfoil in Old Fogey style which gave me troulbe in dihedral
So i trimmed 1 Cm from the centre of the wing (wingspan = 33" - 1cm)
Also the dihedral was supposed to be 10° but it ended less than that
For the monoblock , I made a depron block (not mono) with ribs , I think it would work better and would help in CG
Wing and the mononlock are completed but rest everything is still left
Blu Baby RCG link: https://www.rcgroups.com/forums/showthread.php?681556-**-Blu-Baby-Primary-Trainer-**-Plans-Pics-and-Fun!&highlight=first%20plane
Ok , I am unable to upload any pictures because ther are bigger than 200KB
Now what to do
post them on postimg.org and share the link here
Here are some pics (thank you @prabal 276)
https://postimg.cc/image/se1g2lijr/
https://postimg.cc/image/latkmyi93/
https://postimg.cc/image/nqqsneirb/
https://postimg.cc/image/di2wv0euv/
https://postimg.cc/image/9lpkz0efr/
https://postimg.cc/image/3krw1wp8n/
(https://s31.postimg.cc/se1g2lijr/20180525_125321.jpg) (https://postimg.cc/image/se1g2lijr/)
(https://s33.postimg.cc/56ygnypa7/20180601_203552.jpg)
(https://s33.postimg.cc/n9rjf6df3/20180601_203559.jpg)
(https://s33.postimg.cc/9sukwbij3/20180601_203637.jpg)
(https://s33.postimg.cc/4hfobl9b3/20180601_203645.jpg)
So the build is almost complete
I just hace to setup the transmitter , get some velcro for the battery , check the CG and get some time to fly
Ahmad, try this
Click "insert image"- the first icon just below the B(old) icon
In Post Image, go to "Direct Link" and copy
Paste between the parentheses in the the "Insert Image"
Quote from: sanjayrai55 on June 02, 2018, 08:33:36 AM
Ahmad, try this
Click "insert image"- the first icon just below the B(old) icon
In Post Image, go to "Direct Link" and copy
Paste between the parentheses in the the "Insert Image"
Ok i did that
Thank you for telling
Great
So much easier to see now ;D
Wow , i never realised this is my first build log on RcIndia