Hi friends,
I have a
1800kV motor
http://www.rcbazaar.com/products/1942-avionic-m182631-kv1800-micro-brushless-motor.aspx (http://www.rcbazaar.com/products/1942-avionic-m182631-kv1800-micro-brushless-motor.aspx)
A 20 amp ESC
http://www.rcbazaar.com/products/806-avionic-20amp.aspx (http://www.rcbazaar.com/products/806-avionic-20amp.aspx)
Two props ( 6x4 and 8x3.8 )
http://www.rcbazaar.com/products/314-electric-flight-prop-6-x-4-e.aspx (http://www.rcbazaar.com/products/314-electric-flight-prop-6-x-4-e.aspx)
http://www.rcbazaar.com/products/321-electric-flight-prop-8-x-38-e.aspx (http://www.rcbazaar.com/products/321-electric-flight-prop-8-x-38-e.aspx)
Rc bazaar says it would give 500-550 gms thrust with 8x3.8 prop and 2 cell 7.4v battery
The only material I can find are thermocol and coro
Please suggest me a suitable plane to build. :help:.
Samlikespad has already suggested me with blue baby
I'd be happy to hear others suggestions and help..
I'd also like to know 11.1v can go with this setup
Thanks :hatsoff:
STC,Blue baby,Firefly,EZfly are all good beginner planes you can build.
Where can I get plans for stc?
And I cannot find firefly other than in cars section in the forum ???
Got plans for stc from other forums,
can I build 65% scaled version of avispad from coro?
Priyum,will it go with the 1800kv motor?
Thanks
Safeer, the EZfly seems good but better use foam as smaller the SPADs get, the heavier they end up at least for your first build. And bear in mind that you will need a pusher prop for pusher configs like the EZfly.
My friend, Johnnywalker8pm in this forum had a bad experience with that motor you have selected. the prop never stays together with the motor after 1/3rd throttle. better try something else. As always, i suggest emax CF2812 motor. its robust, neat strong and efficient and can be over propped upto 9x4 prop without overheating. gives somewhere around 600gms of thrust!!!
Ashok.P
Thanks sameer & ashok,
I found the motor at eBay,value hobby,emax model,headsuprc and to my great happiness at rc dhamaka.
Why didn't I see this earlier :'(.
For the prop and esc ,should I buy from dhamaka or will the bazaar one will do?
BTW what do u think about
http://www.rcbazaar.com/products/1943-avionic-m202812-kv2300-micro-brushless-motor.aspx (http://www.rcbazaar.com/products/1943-avionic-m202812-kv2300-micro-brushless-motor.aspx)
Gives 600-650 gram thrust.and are avionic products not good?
Thanks ashok,great thanks :hatsoff:
Can I select russ40's trainer? (:|~
Can someone point me with links for a suitable prop,esc for emax2812 motor in c dhamaka4?
Thanks!!
Its a good one Safeer. http://www.rcindia.org/electric-planes/build-log-russ-40-trainer-(quick)/ (http://www.rcindia.org/electric-planes/build-log-russ-40-trainer-(quick)/)
Safeer, go with Russ trainer. very good.
Just a opinion. better go with a 1000-1200 kv motor, and this one is, one of the best. you wont regret..
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=100_93&products_id=391 (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=100_93&products_id=391)
The above posted thread of russ trainer has everything, still just for refrence
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=100_93&products_id=391 (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=100_93&products_id=391)
I need to select propeller for the emax motor, will you pls post links for those.?(from rc dhamaka).
Contacted with dhamaka,still no reply.
I don't want to make mistakes .not again :o .
will the motor go with the avionic 20 amp esc?
What I still lack is a tx & rx .I am saving rs 3000 for rcb6i frm rcbazar
Thanks
http://www.rcindia.org/electric-planes/home-made-coro-trainer-plane-50'-span/ (http://www.rcindia.org/electric-planes/home-made-coro-trainer-plane-50'-span/)
This is Russ40 trainer made out of coro ,right?
Safeer, below is some prop suited to the motor , i have posted in above link.
orange props, good but may break easily. 9 or 10 inch.
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=902 (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=902)
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=754 (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=754)
strong apc props 9 and 10 inch
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=674 (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=674)
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=675 (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=675)
propsaver. Better use prop saver. it will save props on crash.
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=405 (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_48_80&products_id=405)
if need any help can call
manoj
7768069805
manoj,
Great Thanks..
( The prop I bought from rcbazaar earlier never got fit on the motor.
So this time I thought I would ask for suggestions from people who bought the motor and prop from
rcdhamaka.
Hope it all fits well.. (props,prop saver) )
Practically, this would be my first flight.Probably I am going to break props.I think I'll buy two 9x5 orange props
BTW, I can use my avionic ESC for the motor, right?
For the battery, any suggestions.
Safeer , the props i have linked above will fit to the motor with prop saver. The apc props have small rings , which helps, to fit any prop .