Idol Balsa kit build log- for 2014 Sweepstakes

Started by vasanth2787, March 13, 2014, 10:40:18 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages1 2 All
User actions

vasanth2787

March 13, 2014, 10:40:18 PM
Idol - laser cut kit
My first ever build :-)


Wingspan：890mm
Length：715mm
Flying Weight:430g.
All balsa and heat-shrink film.
Powering with cox 0.049 engine.

vasanth2787

#1
March 14, 2014, 10:21:33 AM
Wing No:1

vasanth2787

#2
March 14, 2014, 10:23:46 AM
Start of wing no 2

vasanth2787

#3
March 14, 2014, 10:29:35 AM
Wing 2 on progress

vasanth2787

#4
March 14, 2014, 10:34:17 AM
Completed wings  ;D

sanjayrai55

#5
March 14, 2014, 11:39:19 AM
Looking good  :thumbsup: :thumbsup:

vasanth2787

#6
March 14, 2014, 11:55:55 AM
Thank u  :salute:

rcpilotacro

#7
March 14, 2014, 02:44:42 PM
vasanth at critical junctures keep news paper, so far so good {:)}
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

vasanth2787

#8
March 15, 2014, 12:40:01 AM
Gusty,

Sure will do that.Thank you

vasanth2787

#9
March 15, 2014, 12:42:34 AM
Joined the wings

vasanth2787

#10
March 15, 2014, 12:46:22 AM
Starting with rudder  ;D

vasanth2787

#11
March 15, 2014, 12:50:29 AM
Assembling elevator

vasanth2787

#12
March 15, 2014, 12:53:08 AM
Done with rudder and elevator  :)

raja_mastana

#13
March 15, 2014, 05:42:14 PM
goood build!
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

suvansh b

#14
March 15, 2014, 06:08:36 PM
very neat work!!!

vasanth2787

#15
March 19, 2014, 12:09:17 PM
Hi raja

Sorry was busy with work.Thank u :)

vasanth2787

#16
March 19, 2014, 12:10:02 PM
Hi suvansh

Thank you

vasanth2787

#17
March 20, 2014, 08:08:09 AM
Covering of vertical stabilizer and rudder

vasanth2787

#18
March 20, 2014, 07:15:38 PM
Rudder

vasanth2787

#19
March 20, 2014, 07:16:11 PM
Finshed

vasanth2787

#20
March 20, 2014, 07:17:10 PM
Elevator

vasanth2787

#21
March 20, 2014, 07:18:04 PM
Out of covering film: :( :headscratch: ordered waiting for it

manojswizera

#22
March 20, 2014, 07:34:44 PM
Good job vasanth.
is balsa is your first plane ?
Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

vasanth2787

#23
March 20, 2014, 08:33:48 PM
Hi manoj,

This is my 1st kit built.I did 2 ARF..Thats it.

rj varun

#24
March 28, 2014, 04:01:25 PM
nice work dude..where do you fly in chennai? interested to meet you..
Print
Go Up Pages1 2 All
User actions