Mr.MOSS 46" Kit Build Guide

Started by Rao, June 18, 2009, 03:12:19 AM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

Rao

Could not maiden it today. Because yesterday a late summer thunder storm started in the morning with real high winds which resulted in many uprooted trees and it continued to rain heavy till mid night .Today even though the rain and winds stopped sky is still heavily clouded. If weather permits this evening I will maiden.Post the pictures ASAP. But video will have to wait because my son is away from home for a couple of days with his friends and took my Video camera with him.

sahilkit

nice build log  :), have you flown the model ?

sahil
Today might be a great and wonderful day. It depends on you.

sriharishine

#27
I want to know the position of the WING to start from? I mean the position exactly

Rao

Wing position on MOSS depend on the weight of the Motor and Battery being used. CG point on the wing of MOSS is 1/3 rd the wing cord or directly below the carbon wing spar.For the 1st flight position the wing on the fuselage and slide it forward or backward along the fiber fuselage channel so that the plane balances at the CG point. After the 1st flight you can adjust the balance point as necessary and trim the plane so that it flies level with hands off.

sriharishine

How to check whether the plane is balance at the CG point?

anwar

Hangar : Please see my introduction.
RC India forum and me : About this forum.

maxanjli

where is the cg of the mr,moss glider

rcforall

Refer to the  post of Mr Rao above  3 posts above
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

maxanjli

hello sir i have bought mr moss glider with transmitter,i have few questions because i assembled it but it didnt fly.in instrucion manual i didnt find where to put the fibre glass's fusalage the small one .and most important where is the CG.  Please help me out i am new to rc stuffs.

anwar

Regarding CG, this is the post Sai/RCForAll is referring to : http://www.rcindia.org/electric-planes/mr-moss-46'-kit-build-guide/msg13245/#msg13245

I am quoting it below also, for your reference :

Quote from: Rao on February 04, 2010, 02:36:15 AM
Wing position on MOSS depend on the weight of the Motor and Battery being used. CG point on the wing of MOSS is 1/3 rd the wing cord or directly below the carbon wing spar.For the 1st flight position the wing on the fuselage and slide it forward or backward along the fiber fuselage channel so that the plane balances at the CG point. After the 1st flight you can adjust the balance point as necessary and trim the plane so that it flies level with hands off.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

Rao

Please read this thread from the beginning. How to build the MOSS is explained complete with photos.

hangingtough

hi,

i am building a 28" + 6 + 6 = 40" with 7" cord .

Coro is 3mm

Kindly tell me if the wing is ok.