Friends..and Colleagues..i was too busy with my works, but got some heavy inspiration, from one of my modeling student, as he completed one simple fly his own. and, when we thinks about a flying machine,all we wishes to be as a stable one..this is my humble effort, that i made this fly from simple things, and from scraped materials.

i do not have any criteria about the design, or specs, and i made it from one spare wing, that i completed with thermocol, for a biplane, and the tail, and vertical fins are from straw board.reinforced with sticks, and brass rods, it works well..

the fuselage is a simple reaper structure, and main wing is fixed with some balsa strips..i fixed the wing with super glue, and all needed surfaces.
i got this motor, from my Friend, who is an avid RC flyer, as crashed and burnt, and i reworked its spline, to re fix the bearing, and rewound to some more heavy standards possible.and at present i do not know the rpm rating of the motor..

at first my decision was to make wings from straw board..but as i realized that i holds one spare wing, finished..i used it..total wing span is 38 inches..

showing vertical plane and drive..its all simplest possible..

servos are placed in a simple manner...

i used two easy connectors, to the pivots made works easier...
added two stoppers to avoid any bending in the drive rods..

showing the motor set ups..

used some washers to get the thrust change..and showing the connectors instead of golden ones..

receiver is fixed with high fix glue foam tape,..

its all simple...i avoided the landing gear deliberately, as my flying ground is covered with high grass as rain starts...so i can soft land on grass after flying..and can also avoid some weights..

time to fly...after some final adjustments, she is perfect..and stable..and sure i will shoot a good video, as i got some of my friends, as it is almost impossible to hold the camera in one hand while flying, and very unwilling to crash my easy bee deliberately...by Sunday, i will be with one of the ever veteran aero modeller and RC flyer of Kerala..and will shoot a good video..and will take more advices and studies from him..