For the wing, you mentioned, strengthening guide as 'PVC' pipe and when you are joining the wings, there is a CF tube, passing through. Would you mind giving the dia of the pipes - both PVC and CF?

@girishsarwal:- Thank You so much..

@ujjwaana:- Making these out of PET jar is very simple, You can also make it by yourself, Check this out:-
http://www.foamflyer.info/canopy.pdf
http://www.electricflyermagazine.com/popbottlecanopies-page2.html
http://www.rcmf.co.uk/4um/index.php?topic=79636.0
(You can use Plastic toffee jar as the POP bottles in these sizes are not available)

@rcpilotacro:-Check this out,
http://www.nextcraft.com/make_wheelpants.html

@PankajC:- CF tube Inner Dia- 12mm       PVC Pipe Inner Dia- 14mm
                           Outer Dia- 14mm                   Outer Dia- 16mm
I think the Picture below is enough to show that how I managed to make it Exact..

             
                         

Both wings done..

Fantastic... 

Cowl Ready and Installed..

very beautiful.. pl post the pics of whole model ( along with wing) , so we can see the actual beauty of whole model.

@Mjet- Mohan Dada, Have a look..

This is hard to believe    , that this model is scratch  build  . Tanmay, You have demonstrate great  skill and motivate and inspire others to build . 

@Mjet:- Lot more to come in future dada, Including Scratch build Giant Scales, and Turbine Jets..

Top Flite Monokote..

Nice covering job

Finally, Got the time to work on this Airplane again,Also got the Servos, Extensions, Motor, Hardware Accessories etc etc..
Pics Follows..

  its truly a build log...
wishing u happy flying...

have good flight soon

Abhay; where do you fly?

not on your airstrip sir
there is very big clear ground in back of the house sec 46

Setup:-
Motor- Turnigy Aerodrive SK3 - 5045-500kv
Servos-Turnigy 380MG Micro Servo (Metal Gear) 3.6kg / .15sec / 15.6g
ESC-Turnigy Brushless ESC 85A w/ 5A SBEC
Battery- Turnigy nano-tech 3000mah 6S 25~50C
Prop-APC 15x8

Tanmay, that is going to be a rocket 

Ha Ha Ha... 3D Rocket..

wow! that's one powerhouse of a setup you got there!

Sent from a potato using a lamp - now mashed

Rudder Servo Installation..

Some More..

Control Throw..

awsomeeeeeeeeeee