dont worry ..  planes looks dont matter in air.. see how it flys.. my katana turned out really tail heavy.. i had to add additional motor mount box to balance the cg.. make sure u are estimating everything  now itself.. it should be great .. try a 6s setup .. instead of 5s .. hardly any difference in cost ..
this was the setup of a friends Sebart katana 60"
motor-hacker- really low kv (dont remember the exact figure ..around 300-400kv)
battery- 6s 3000mah 25c
esc-60amp turnigy plush
prop-16x10

i was getting around 7-8 mins of flight time...  thats more than satisfying i guess..
power was insane .. never required more than half throttle .. except  to come out of hover..

Superb, Shadman. Tanmay, I just can't wait to see yours in the air too!

Some More updates:-
Fin attached to the fuselage..

Rudder (Modified)..

Finally.. After 2 Long nights and lots of methods, Here is 1 ROUGH Canopy made using Plastic Jar (PETG Jar), Foam Plug, and 1 heat gun, I know it is not that much of clean , But Today Will try making another Canopy with some serious efforts..  

Some more:-
Also Will start covering it soon, Please suggest some different color schemes..

Looks like it could take off without any covering

LOL

Here is a very different and original colour scheme

But Very Typical to do..

magnificent build Tanmay 

crazy build!
Looks better than factory made stuff

check this out...
http://www.ffscale.co.uk/page4f.htm

or this...
http://www.ffscale.co.uk/page4g.htm

hope it helps!

@umayash1 /tanmay
Hope you can bring it to Indore.
I wll mow a runway for you.
Thanks for the engine.
Regards

Sure Sir..

Started making a cowl..
Some Updates..

Cowl..

To be Continued......

wow! you saw the links I posted?

Sent from a potato using a lamp

aniket:- Those PETG Plastic Sheets are not available here.. So I used PET Plastic jar for canopy..

use OHP sheets.... they work suprizingly well

Okey, Will try.. Thanks..

Cowl..

..

Still needs more finish..