Micro slow flyer ...." preggy"

Started by romanxdsouza, September 25, 2015, 08:49:44 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

romanxdsouza

Omg my airplane is pregnant....thats how she got the name....."preggy"
channels- 3chn RET indoor and out door ...no wind conditions
wing span- 20inches
auw- around 25 -30grams
material- balsa ,school brown book cover laminate,thread,skewers....rest any questions ask or pm
wings- V dihedral under cambered ...and off course detachable for easy transport,fits easy peasy in a small bag
electronics- from  airplane champ from horizon hobby ...use google, battery 1s 150mah
plans-  no plans.....i seen it i made it...but yes..it is a replica of a rubber powered airplane i seen   on you tube i think it was a guy from vietnam who made it here it iswww.youtube.com/watch?v=lrjhGz2M0Lk
PS: not for begginers

romanxdsouza

#1
I dont like geting up and taking pictures while building but still i took some ....this is all i have

romanxdsouza

#2
Frount view,back view,left side view,right view and ... and preggy is ready for electronics :thumbsup:

romanxdsouza

#3
Preggy is all covered up and ready to show off  her belly on some low passes while flying,she can be hung on the living room celing as a show piece /display as well,can easily fit into  a small bag.

romanxdsouza

#4
Here is a quick close up

▶ 0:41
www.youtube.com/watch?v=5p_jAztIkQo

romanxdsouza

#5
Preggy in action with the 150mah 1s she can fly easily for 15-20mins with just a bit of throttle . Landing is a bit difficult on rough surface indoor she will be even more beautiful
▶ 1:55
www.youtube.com/watch?v=V1UrkWo7WpE

K K Iyer

@romanxdsouza,
Excellent! Congratulations.
An inspiration even for an oldie like me.
I'm sure ashok baijal, who keeps building something new and different, will build one of these next  ;D

romanxdsouza


RCNeil21

Nice build and nice name :giggle:
you want to get preggy bitten what, why you taunting dog? :giggle: :giggle:
Build planes like feathers rather than tanks, both handle bullets equally well.

rcshailesh

Roman,

As usual its supra..  {:)}

Now I shifted my interest from park flyer to Micro.. :salute:

Shailesh

romanxdsouza

Thanks neil and sailesh......micro is fun sailesh just have to remember 3letters AUW :thumbsup: .....the fun part is all my indoor  micros i have flown outdoor :giggle: :giggle: just have to choose the right weather to fly.

romanxdsouza


romanxdsouza

#12
Preggy also does ROG and does some good landing

www.youtube.com/watch?v=HDB1DPveHi0

romanxdsouza

Preggy trys another ROG


www.youtube.com/watch?v=tAoBFSJ01o0


romanxdsouza

Mistakes made:
-with the  balsa wheel i dint get proper landing so swapped it with foam wheels which put in 2 -3 grams of weight :giggle: :giggle:
- did not give in some degree right thrust on the motor so trim is way towards the right on rudder .....but now all good and  balanced
- could be made lighter  :thumbsup:
- went on a slightly windy  day to fly :giggle: :giggle: :giggle: i prefer no wind at all, because  then preggy can show off and do close pass by near to me and watch the joggers admire her.

Antriksh

That's awesome sir.
Great build and well flown. I love the model and definitely going to build one coz it's rainy now days and flying outdoor is difficult due to long grass in the field. This plane i can fly indoor as well as outdoor.
I have been looking for the electronics but can't find in India and these are very costly.
So any LHS selling electronics.
I also love DIY so any destination plz PM me link.
Thank you.

Regards.

romanxdsouza

Yes true micro electronics are difficult look at my slow flyer they are not bif 24- 30 inch max those fly well on small grounds infact all my nuild are for small grounds.....i too dont have place for micro....all my micro fly out door hahaha early mornings are the best

romanxdsouza

Would like to share some info on the covering....had many question about it.. the material i use to cover is easily found......the brown school book covers have a laminateed plastic on them thats what i use.....u may have troublpeeling the plastic from the brown paper its because of the glue used ..so  i   tried putin it in water and then boiling it it then seem to peel out easy.....i then removed it from the water peeled of the brown paper wich came of very easily and used the plastic...I have also used vegetable bags the transparent ones in bazzar they worked tooo http://www.rcindia.org/electric-planes/f1d-type-electronic-indoor

Adhesice use to cover is fevicol SR 998.....this is very very tacky sticks to finger and is difficult to remove.....i mix equal quantily of fevicol and acetone  and then apply on the balsa u can use it on carbon rods too.....its a real pain actually  :giggle:working with it  :banghead: :banghead:

romanxdsouza

#18
got back here after long put some colour on her and this is what she looks like now, enjoyed take offs and landings ...must watch
  8-) 8-) 8-)     

sanjayrai55


wingmanbunty

EAT ,SLEEP , FLY

romanxdsouza


gaurang.1972


rcrcnitesh

Maker | Aeromodeller | Teenager

romanxdsouza