This would be my second model for sweepstakes another balsa model,
wingsapn is 22inch
weight is 160g
3 channel plane
@jana.f22
Lovely choice of model!
Best wishes.
Nice choice all the best
Great model
Remembering my spacewalker ! may her soul rest in pieces
http://www.rcindia.org/gas-glow-nitro-planes/vq-models-spacewalker-build-log/ (http://www.rcindia.org/gas-glow-nitro-planes/vq-models-spacewalker-build-log/)
Thanks everyone. This will be the smallest model i ever biult
Todays progress
completed the fuse parts
People looking for Plans for 0.46 to 0.60 version of this beauty ! here it is
Planning to convert this to DXF format tonight, anyone interested let me know ( I'll put it up anyway)
Todays progress
completed the covering work, have to put them togather.
Good luck! Coming out beautiful
Yes Sanjaybhai, it really looks beautiful. Nice Job.
@sanjairai sir @tailil thank you sir
model weights 85g for now with motor.
Jana sir was this the model u told me about?? Also u have superb building skills...looks awesome...
Very nice sir hope to fly with you one day.
Finally the model is ready for take off!! waiting for the sunday :bow:
Electronics used
Emax
1806 2200kv motor
10A esc
9g servo
5x5 prop
Tiger 7.4v 500mah battery
AUW : 180g
Size reference pics
When Nitesh when !!! we all are eager to fly with you one day.. >:D
Jana
You are prolific to say the least ! good going !!!
@ganesh yes ganesh this is the one i told you.
@rcnitesh you are most welocme.
@rcpilotacro Thank you sir.
Sir, this when is killing me seeing all of you guys having a good time flying I feel jealous. I was going to buy the Imax b6 copy from robu.in's ebay listing when I saw it became out of stock. Will have to wait for Kumaran sir to stock it and then I will try my best to come and fly with you guys.
@rcnitesh You can use my charger in the field for now if you want.
Sir I will try my best to come this sunday.
BTW thinking about resorting to micros for flying in near by parks and grounds.
Did the maiden but didnt go well
Can anyone say why my plane is doing this? when lauching it goes straight but if a rudder input is given it tries to roll so fast. This is 3 channel plane. suggestions pls.
https://youtu.be/-ndSPoujSik
https://youtu.be/G5d0TusB08k
https://youtu.be/5tsUMf8Jjv8
Recheck the rudder alignment on elevator, is it 90 degrees? And the perpendicular alignment on elevator.
Suggestions:
1. Lower the CG. Try and put the battery as low as possible
2. Reduce Rudder throws.In the first video they seemed very high; and that is a large rudder area too
3. Put 40% exponential on rudder
+1 to Sanjay Sir,
Further
Reduce Prop Size by at least 1/3 if not half. I hope you have given the 2 Degrees down and 2 degree right thrust to the motor mount.
Move your CG at least 3-5% forward.
@kiran The rudder alignment is perfect 90 degrees,
@sanja rai sir, sundaram sir - using expo 60% and cg is slightly nose heavy, the recommended prop is 5inch. this is a5x5 prop. yes there is 2degree down and right thrust. even tried reducing the throw to 50% in the last video still the same.
I still think its tail heavy its not dipping nose when wings are level rather its climbing.
Only when banked its dipping nose which is but normal.
Also, check axial CG. As I said before - lower the CG too. Try temporarily fitting the battery to the outside of the model on the fuse bottom. A high CG will make it unstable in roll
I ll try adding weight below the nose part.
here are some suggestions
mix in a bit of up elevator with rudder
put some washout in the wings