After a few corro models, going to build mini old speedster out of 5mm depron with a wingspan of 20".
Electronics:
18g , 1800kv bl motor
10amp esc
5 g servos
2cell 500mah lipo
Printed out the plans.
Wing construction. V groove is cut in the wing to make an aerofoil shape.
Horizontal and vertical stabilizer cut and sanded from fine grit sandpaper.
do building material cost you cheap?????
Quote from: prabal276 on July 28, 2015, 11:45:03 AM
do building material cost you cheap?????
I didn't get you. ???
You have done many builds
Prabal, yes actually I had some depron left over and corro was only the thing I brought. As I am into this hobby for 3-4years now, I had many spares left with me. Depending upon the things I had ,I choose the plans and build them. ;D
Wing construction.
Tail construction.
Excellent
:thanks:
Good going Kiran,make sure she flys on a nowind day ;)
Thanks prashant :thumbsup:
Fuselage.
More.Tail surface glued.
Wind slided over the slit and glued.Bare fuse weight is 34grams. ;D
Tail wheel added.
Motor mounted.
Servos mounted.
Pushrods installed
Control horns.
Turtle deck.
Front and back deck completed.
Landing gear installed.
Model completed! Will test it at evening today!
Was very busy last few weeks.
This thing has really sensitive controls! Got a video.
https://www.youtube.com/watch?v=Cyb-IpZfdfA&feature=youtu.be
{:)} {:)} {:)} {:)} {:)} {:)} great build ...whats the auw ...hey kiran you can add links to your micro airplanes the ones which successfully flew add a pic off the airplane and then the link to your builds here http://www.rcindia.org/electric-planes/successfully-flown-micro-airplane-thread-only/msg154372/#msg154372 so we can keep all micro airplanes together do read the very first post
Thanks roman :hatsoff: auw is 230, on a little heavier side. Will surely upload on that thread. Just wonderin if it falls under micro category. 8-)
yes... 20 incher is micro,u are doin great for your age in micro, slowly try and reduce weight on your builds.