Hi Sai,

I received the MR Moss glider ARF Kit a few days back. Thanx for the same. This is my first build and I have gone through this entire post (and others). Pardon me for some very basic questions. (1) Where is the second smaller fiber glass rod being used? (2) And I presume I have to cut the wing to the same breadth as the polyhydras (7 inches). (3) Do I use the thicker rod for the bend (connecting the polyhydral to the wing) and the thinner one for the servo connectors? (4) Does the main wing require reinforcement or should it be fine as it is?.. I am getting all excited to fly my first plane... Would appreciate your help with the answers.

First of all  go ahead and try out what ever you think is possible  with it . The idea behind MOSS is to allow flexibility in building it the way you  can imagine. There are no rules and regulations concerning MOSS build 
Having said that  the answers to your questions are :
1) Both fiber glass tubes have to be joined together to acheive the correct length of 30 " for the fuse.
2) Some cut it to the  width of polyhydrals others leave the extra as it is to use as ailerons later the  extra width does affect the flying charecteristics  when left , but some persons I know have  adjusted to it and fly it comforably with the additional width.
3) You can use cycle spokes for bending the polyhydral  rods
4)  Depends on the wind conditions  some additional reinforcement is need if you fly in high wind areas.

Rgds
Sai

Quote from: rcforall on May 31, 2009, 09:51:50 PM
It is Indian EPP you can make an EPP plane with it 

wt is EPP plane

hello sai uncle this is abhi from hyderabad.
the Mr.Moss glider is delivered in this morning, can i have its documentation 

Welcome to RC India

Please use the "Search" feature of this forum, as there is already a lot of information on the Moss (including build threads) already posted.

Here is a Photo Guide to build Mr Moss :
https://picasaweb.google.com/rcforallin/MRMOSSASSEMBLY

Sai

what is the cg point

its been a long time since i started this thread to answer kamaraj's query

while i flew it the cg was about 7 inches from the forward end of the aircraft

Subbu

please give suggesstion
http://www.youtube.com/watch?v=ajIoV8VNNu8&feature=plcp