read the part about the prop i posted earlier... an 8*6 might be too much for the motor...

this motor can also be used with a 3s so I don't think 8*6 is too much but if it is more then I'll change the prop

Sanjay sir thanks for your inspiring words

why dont you use a emax cf2822, with a 20A ESC, a 10*4.7 prop, and a 1000-1300 mah 3s Lipo?

this was the same setup suggested by another member via pm's but he told to use a 9*4.7 and 850mah lipo

that's good too

Sent from a potato using a lamp

will it produce enough thrust and will i get atleast 10min of flight time with it on variable throttle

850mah? for a 42" WS? thats a bit low, even a 1300mah 3S is good enough.

yeah that was the same question I asked

though the emax motor generates 700g of thrust... that's more than enough... get a 1500-2200 lipo...

Sent from a potato using a lamp

i started with the monobloc

it is made out of 1.5 mm foam pieces.
i will be going slow for this plane

Hello
should i add ailerons is it neccesary please reply fast.
and I am going to go very fast because before 10 min. I got to know I am going out of station on 18th so Please don't mind if I can't post the whole build log.

plane is getting shape

plane is getting shaped