Update

@abhayf14,
Quite an ambitious project.
Now that it is nearly complete, what engine/motor are you planning to use?
Regards.

i will be using 295kv 110 motor on 10s lipo
i will complete it by next week

wow... i am left speechless...

That's a Huge one .... All the best for the maiden..
By the way what's the All up weight ?

omg. waiting for maiden video

just measured
it weights
5400 grams every thing
4000 grams without lipo and motor

That is heavy!

All the best for the maiden. Where will you be flying?

thanks  sir

i will find new place for flying
first i had to correct cg
n wait for the propeller adapter to arrive which i had ordered

Good luck! People have built this with a 38 cc Gasser @ 7 Kg - you should be fine

@abhayf14,
If you are using a 295kv110 motor at about 120v and 55a,
please exercise extreme care, as that is about 8 hp.

Before test flight, pl do full power test on ground to verify that the motor mount can cope with the power.

Since it is quite a large aerobatic model, i presume you have checked the Gs the wings can take.

Make your test flight gently.

Abhaybhai, Its really Great work and..
i dont have a word for this.
Just 

Simply put not every body can be an artist but great artist can come from any where Abhay you are like that great work

thank you very very much

  Some thing huge coming   
@abhayf14,  best wishes for the maiden.

When's the maiden?

While testing the motor I burnt it
I ran it on 12s
Rated was 10s

 

Oh oh 

Any updates.... Maiden .... Eagerly waiting to see this giant airborne .

not yet
i rewinded the motor but i got only 3kg out of it not enough thrust

This is reallyy gzeeebb..