nice build log krish. Best of luck with your trainer Which radio will you be using? Is this your "first build" or just "first coro build"?

Thanks Raj..This is my first build,I have a Spektrum Dx6i..

Can any spader help me regarding the ailerons?

What help do u need regarding ailerons...?

ailerons dimensions are not available in the plan,u can refer the plan pics,,

For trainer you could use 10% to 12% of the wing chord.

You can use 12-15% of chord length.
I have used 15% of chord length on my glider and works really good.

@Ismail:the wing chord is 200mm,so 11%of 200 mm is 22mm..so the breadth of the aileron is 22mm??

a/c to the following plan pic 20mm is extra thr from the trailing edge..

are the percentages for the breadth or aileron area?

percentages are for breadth

@Spitfire:15% means 30mm.so I've to glue it over the 20 mm portion n mane the hinge at the 20mm's meeting point?

aer you going to cut the ailerons from wing you have made or attaching them externally to wing you have made...?

I can't understand ur question spitfire.

I want to glue it over the 20mm portion

I mean to say if you are going to cut some portion from wing you have made and then glue it again as aileron or you are making new piece for aileron and then attaching it to your wing...?

new piece for aileron over the 20mm portion

Reply #22 has been updated with the right attachments :

http://www.rcindia.org/electric-planes/my-first-coro-trainer-build/msg31091/#msg31091

What i can understand from pic is that u should cut that extra 20mm portion from wing and then attach it as aileron.
Anwar am I correct...?

thank u anwar..

one guy told me in spadworld forum same as like u spitfire..he told me to cut the remaining extended portion n attach it using fiber tape..is it good way?

I think this pic from RCG also explain the same thing.
http://www.rcgroups.com/forums/attachment.php?attachmentid=1961165

If you look at pic...there is no flat portion in wing other than ailerons.

which is the good way,cut the portion from wing  and then glue it again as aileron or making new piece for aileron and then attaching it?

I think it will not make any difference as long as you cut it properly

this is my first build so don't know which one to choose