I have made coroplast plane and iam waiting for motor
very neat build sir.. :)
Love the blue stripe...
neat finish sir {:)}
Very good finish.. pl share , that how you will bind wings on fuse?
Sir,
Now this is wow factor...hatsoff
what is auw?
Is it an avispad?
What motor combo are u going to use?
Will u be mounting wings with rubber bands?
Have you decided its name?
Pls start a build thread on this... Very neat work sire.
using rubber band i attaching wings with fuse
i will send latest photos
I think AUW is around 850 grams approximately
motor is D2826-6 2200kv Outrunner Motor 342w
Hobby King 40A ESC
Sir,
could u please share its paper plan with us?
Thanks
ss
here i have attached my plan
Quote from: kamaraj74 on August 06, 2012, 12:21:24 PM
I think AUW is around 850 grams approximately
motor is D2826-6 2200kv Outrunner Motor 342w
Hobby King 40A ESC
Sir are you sure to use 2200kv ?
2200 kv can handle 5 to 6' prop. Better to use 1000 to 1500 kv motor with 8 to 9' prop.
Just my opinion.
Thank u for ur advice i take ur points
Very nice build. Do you intend to fly this at sholavaram?
Very nice and clean build {:)}
What is length of the wing I could not found it in attached plans 8-)
wing span is 44 inch and 5inch dihedral angle
Thank u sir , certainly
Very clean build as all have commented before. As some people have suggested, I think you should go in for a lower KV motor (1000 - 1500) with a 9 X 5 or 9 X 6 prop. All the best for the build and its completion.
Thanks for your suggesstion
cool build!
i am using turnigy 2826-6 2200 kv motor,40a esc, 2200 7.4 v lipo and 7x3 prop
my model weight is 1000grams, i dont know motor is sufficient to pull
anybody advice me, thanks in advance
Admin note: Moved out of "For Sale" thread and merged with your existing build log.
Now that is one sweet plane with
all the right proportions.
Check the C.G - about 30 %
thrust line slightly down - about 2 degrees
slight positive incidence in wing angle of attack
it is 100% sure to fly well.
Thank u sir
Here is a video of her flying:
http://youtu.be/U7tt_L1GF30 (http://youtu.be/U7tt_L1GF30)
hi,
coro size?
(2mm?)
and pls upload your video of construction sir.
Very nice Arun. I was going to suggest go with a 2836 950-1100 KV but your motor seems adequate. Great flight!