hi,
long back i was doing practice to open a slot in a dense thermocol block like you have. seen a video in youtube and finally i was able to dig a slot in the block.
see the pic below and try to understand the illustration and text.
Sandeep

yes sandeep sir
I did the same thing....

Sure sandeep sir, will keep that in mind next time onwards.

@avishek : how do you plan to attach the push rods in your foamy?

I will attach servos near to stabilizers on fuselage. I left tube type hole at inner fuselage to pass the servo wire to the end of fuselage.

So, finally after a long delay, the foamy, RG1508 is complete, 10 mins of work remains on it. Everything is done except the painting, have decided to do the painting after the maiden, will post the pics tomorrow.

Alright so after 3 months, and a bit of hectic work in the last couple of days, I finally finished painting my plane and have got the final product which is ready for the maiden. It is a bit of Cessna 182 and 185 actually an average of both. 

Now, let me begin with some pics

  
it looks like an RTF
Rep++

Really nice.....great job....

I couldn't say a word cos my mouth is wide open and my eyes are going

It looks awesome man.  

Thank You so much sunlikestar, ankit and azhaguvel.

Thank You so much VC bhaiya and Kalyan Da, and to all those who have given me your valuable suggestions, it wouldn't have been possible without you.

Good job. Looks fantastic! Have you used any reinforcement for the wings?
And whats the AUW?

I feel ashamed to call myself a scratchbuilder after this!

Rohit, I hope you understand Bengali. There is only one term to describe this beauty "Fata Fati Guru!"

CONGRATS!

Rohit's just gonna xplode now 
But none-the-less hats off to the build and finish 

That baby looks like it was imported from HK. Fabulous build!

If I may be allowed to add 2 suggestions here:

1. Change the yellow rubber bands to black.

2. Get some (4) stickers cut from a car number plate sticker seller - VT - ROG and slap them on the fuselage sides and wing top and bottom. Voila!

Thanks Rajath. Yes have used Carbon fibre for the wing. Will put the details up soon, in a video.

VC Bhaiya, you're the true role model.

Final pics!!!

Quote from: VC on May 13, 2011, 11:51:58 PM
If I may be allowed to add 2 suggestions here:

1. Change the yellow rubber bands to black.

2. Get some (4) stickers cut from a car number plate sticker seller - VT - ROG and slap them on the fuselage sides and wing top and bottom. Voila!

Can change the thin rubber bands(the one which goes diagonally) but I dont have a black colored replacement for the thick one.

Yes, will do that. Thanks.

Build details, specifications and a short video to follow!!! Good night!!

Good work rohit!!! it really looks like an arf

Thick black rubber bands = Old scooter / bike tyre tube (available for free) + metal scale + sharp cutting knife = Simple!

Thank you so much Ashok bhaiya.

@VC bhaiya :  LOL Yeah

Hey nice work!
I like to share with you that even I have made a depron (foamy) aircraft, its 99% done, just a slight paint job is left!
Will post pics soon!
I started constructing it since December last year... Named it as IND333
I made the wing span of 54 inches and total weight is 982 grams!!! Trying more and more modifications!

If you have really made this, no doubt, you are a master in craft, and that glue you use is the best!!

Hey thanks Globalmind and yes I have made this but I am not a master in craft, just a beginner. 

Rohit,
Damn busy I was that cannot read this.

Grate fnish. Anyone can tell it as machine finish or clone including me.

Eager to clone at BE&S`U. Foams, Glue, Hot wire cutter and other gears are waiting for cloning. What motor you used? 150 watt 2812 or old 350 watt ?.

What is the front wheel ? A Closeup pic please. (From VKSingh?)