Print Page - MY NEW SPAD HELL ON STICK...( no rails) :):):):)

Title: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 28, 2013, 04:26:28 PM

Guys check this out my spad made out of single wood piece....wings of coro sheets (2mm)
Specs:
Wingspan :1100 mm
Length :750mm
Chord:220 mm
Motor: turnigy d2836/8 1100kv 356w
Lipo: turnigy 3s 20-30c 2200mah
Esc: hk 30a
Servo- hxt 900
Prop- 10x4.5
Weight: approx 750
I know this isnt a gr8 one but then its my first plane..:):)
(http://img.tapatalk.com/d/13/10/28/murasyza.jpg)

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: santhosh-r on October 28, 2013, 05:35:43 PM

Its super :hatsoff: , what about the maiden flight?

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 28, 2013, 06:15:33 PM

Looks good. The long wood stick fuse looks iffy; weak spot between wing & tail. Good luck with the maiden. Be light on the throttle - you are overpowered :D

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 28, 2013, 06:19:19 PM

Tmrw will be maiden an yea the stick looks like weak..but trust me it is very strong and sturdy bit heavy though

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 28, 2013, 06:23:00 PM

Anyone can help me....? Im little confused about cg...cg should be at th spar line of the wing so i balanced on th spar line but wen i put it on the ground its nose comes down an tail lifts up....please help me how to balance

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 28, 2013, 06:37:15 PM

Simple: move your main LG near the LE of the wing

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 28, 2013, 07:05:01 PM

Ok and my elevator deflection angle is 25 degrees i know 30 degree is required ...will 25 degree do..?

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 28, 2013, 07:07:20 PM

Yeah, sure. Go ahead

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 28, 2013, 08:05:26 PM

Thanks. A lot...:):)

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 28, 2013, 08:10:12 PM

Anytime. I doubt in flight you will ever use more than 15 deg :D

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 28, 2013, 08:11:41 PM

Yea in flight will be no prob was asking in th time of take off

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 28, 2013, 08:19:34 PM

It will be fine

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 28, 2013, 08:19:43 PM

Hey sanjay can you tell me another solution for tht cg problem cuz my main lg are nailed to the wood so it will be difficult to move them...

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 28, 2013, 08:43:29 PM

Better to un-nail. Don't increase weight. Besides, you will ruin your CG. After you move it, you will be a little nose heavy. Can move the wing till you get your CG OK

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 28, 2013, 08:47:54 PM

Ok thanks lets see if it works

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: madaquif on October 29, 2013, 03:10:24 AM

:thumbsup: :thumbsup: gud luck wid the maiden :thumbsup: :thumbsup:

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: rcrcnitesh on October 29, 2013, 02:01:46 PM

Very nice build

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: topalle on October 30, 2013, 05:07:55 PM

cool plane

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 30, 2013, 05:40:19 PM

Flied today was decent ...but then crashed and tore the wing's lower have to make another wing.. :(:(

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 30, 2013, 08:54:10 PM

No video?

Sent from my GT-S7562 using Tapatalk 2

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 30, 2013, 09:24:19 PM

Hehe srry sanjay i dnt wanted you all to see my first plane crash.. :D let me become expert in planes ....im a newbie in planes ..i thought it would be as simple as quads but i was wrong...so sanjay wait for few more days let my hands get used to planes..after then loads of vid

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 30, 2013, 09:34:54 PM

Nothing unusual about crashing. Been there, done that; still do it :D

The point is by reviewing a video you know what you did wrong, and if there were any build issues
Sent from my GT-S7562 using Tapatalk 2

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 30, 2013, 09:47:36 PM

Yea i will upload my vid wen i'll go after few days..i think my cause of crash was that my plane tends to bend to the left all th time....is this due to cg or ive more weight on left wing...?

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 31, 2013, 01:32:28 PM

Hey guys my plane just crashed into the field which had some water now many dust particles and water have gone into the motor...so i opened it and washed motor and dried in the sun ....then do i have to put some oil....??

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: sanjayrai55 on October 31, 2013, 01:40:05 PM

Quote from: EricOliver on October 30, 2013, 09:47:36 PM
Yea i will upload my vid wen i'll go after few days..i think my cause of crash was that my plane tends to bend to the left all th time....is this due to cg or ive more weight on left wing...?

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

As an "intermediate" skill level pilot, you should be telling us :D

Title: Re: MY NEW SPAD HELL ON STICK...( no rails) :):):):)
Post by: EricOliver on October 31, 2013, 01:51:16 PM

Im intermediate on quads ...ive just started planes 2 months ago so im a beginner in planes...

Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m?id=1)

RC India

RC Models => Electric Planes => Topic started by: EricOliver on October 28, 2013, 04:26:28 PM