My scratch build ft guinea

Started by gaurang.1972, February 14, 2019, 11:16:46 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

gaurang.1972

I started to build ft guinea pig from scratch
Motors 2212 1000kv *2,30 amp esc*2,3 cell 2200 mAh
lipo,9 g servos*5

gaurang.1972

From plan tracing

gaurang.1972


gaurang.1972


gaurang.1972

#4
Fuselag noe construction

gaurang.1972


gaurang.1972

Almost completed motors and electronics remain

sanjayrai55

Coming along very well!

See if you can give 1-2 degrees toe in ie both the motor shafts pointing towards each other. Improves stability a lot. I did it for my Twin Challenge

This one:  http://www.rcindia.org/electric-planes/'2016-sweepstakes'-electric-challenge-twin/

prabal276

looks awesome!
I have built this plane before!
Please Strengthen the wing more that what FT suggests! MY wing Snapped!
and use diagonal braces on the tail (bamboo skewers) as the tail on this is quite fragile.
I also would recommend to  add wood braces where the Landing Gears go. Otherwise, with every landing, they keep digging in the foam, structurally weakening the fuselage box.
Regards   

gaurang.1972

Sure Rai sir and thanks prabal i did it

Mehul Anand

that colour combination looks really awesome!!!

gaurang.1972


prafulla


gaurang.1972


gaurang.1972

With motor install

manojswizera

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

kvedula_1995

FT mini trainer is my first beginner plane as of now, though I am trying since 3-4 days in heavy wind condition, here in Orissa wind is pretty strong, monsoon winds, been crashing for a while because panic throw control.

Though I had a lucky few airborne moments a few days back, I observed similar thing, the depron sold here in India is pretty different or lets just say shit quality than the US counterpart, the wing was kind of flapping like a fish in mid air, I can literally see the space between the fuselage and wing lol.

manojswizera

Quote from: kvedula_1995 on March 06, 2019, 01:08:14 PM
the depron sold here in India is pretty different or lets just say shit quality than the US counterpart
its not like that. you are comparing two different things. their depron is covered with virgin brown paper, which makes them strong.
you can achieve the same, with sticking paper to your depron.
Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

gaurang.1972

Thanks Manoj and yes tap laminated foam is pretty strong

prabal276

Nice aircraft Gaurang!
what is your final wing loading?
Get her up in the air, she is craving to fly!

Voice of deaf

That plane looks good, will you use differential thrust on the maiden flight ?
Born for FPV, Forced to LOS.

gaurang.1972

trying to test flight yesterday but stalling problem and nominal damage find out latter cg problem under power or thrust problem (yes deaf differental thrust) any suggesations

test flight link below


prabal276


gaurang.1972

thanks prabal trying to backward cg

jonboy20

 :hatsoff:  Nice.
Where is this?? Ahmedabad itself??