Hi guys,
This is my mikey's FPV3 plane using Biopack foamboard(Dollor tree Foamboard)
Nice build {:)} {:)} {:)}
Thank you Aniket :) :) :)
more pics :) :) :) :) :)
nice finish Bro :thumbsup:, have you tested :-\
thanx Rc Maker :) :) :) :) .
tested once .while flying test its hit ground.nose part broken.i removed additional broken nose part.now everything ok :) :) :) :) planning to maiden this weekend........ :) :) :) :) :)
Happy Flying Bro {:)}, Can u post ur flying video :banghead: ;D
sure. last time i didn't record video. i will take video this weekend then i will post here................... :) :) :) :) :) :) :)
All the best Bro. Nice build.
thank you chetanmayekar :) :)
successfully maiden today :) :) :) :) :) :)
sorry for video quality ..
next time i will upload good quality video....
http://www.youtube.com/watch?v=OX9i5IRg5Qo
first time flying rc plane..... :) :) :) :) :) :) :). feeling excited..
I see power cables? Or overhead wires there, I think it is a hazardous choice of location you should be avoiding next time .....people suggest if I am saying incorrect!
hi iwincar
when i take pics it was not ready. later i stick all cables to upper wing with fiber. so no problem while flying.......... :) :) :)
Hi Rama Rao,
Nice build. {:)} :hatsoff:
'iwincar' is trying say that the location you have chosen to fly the model (near electric cables) is dangerous.
than you sierra :) :) :) :) :) :) for correcting me
thank you iwincar for your suggestion....next time i will avoid that location :) :) :) :) :) :)
Hey even i m working on the same model....crashed it twice.... what electronics are you using...
1200kv 800gm thrust motor and 30a esc . You can go low kv motor for high thrust
Cool bird! It was windy and you flew well! {:)}
And what battery....whats the weight of your model including everyghing...I have used 10mm biofoam...what have you used..?
That looks pretty. Very good effort. {:)} {:)} {:)} :hatsoff:
Now, you should go ahead with a FPV flight with this bird. Agree with iwincar... Try choosing a location which is free of all these wires, etc...
Thank you Swapnil and all..
2200mah battery I used 2mm biofoam. Weight no idea I didn't checked . Ur model might be heavy because of 10mm biofoam.
Use low kv motor for more than 1kg thrust
What electronics you used for ur plane???
@ramarao if its your first plane!! if you flown a rc plane for the first time....just one word........ :bow: :bow: ......No words!!!
If in your first scratch build... you can fly it in such windy situation for the first time.... This is a huge achievment. Not an easy model, not an easy situation to fly. Keep building.... Keep flying. :bow:
Thank you asinghatiya......
It's my first scratch build and first time flying rcplane.. It's my favourate Rc plane.... Thank you:)
Hey Ramarao..sorry for late response.... was out for my sis wedding.... hey i finally figured out that my plane was too tail heavy... so it was stalling everytime i handlaunched it....I installed landing gear and tried a takeoff ...it flew for like 20 feet and bang.again...crashed... have chucked repairing it for the time being... working on a blue baby now