I made my first scratch built in June, worked hard for weeks
but result = Crashed  

Then I made my second scratch built in September worked hard for weeks
but result = Crashed in osmania university grounds  

Then one fine gentleman responded on this forum for help request by me

and here I come with my scratch built plane 3
result= success,

we had not planned any specifics before building, and in fact this plane came back so good


but lot of credit goes to Anwar Ul Haq sir, whose timely guidance made me to build a perfect one, still some final trims to be done

Test flight was on November 5, 2011.  It flew so good, just fine trims to be done, will post u a good video soon,

Regards
Prashant
Hyderabad
9533790861

nice biuld. Looks like a trainer cub..Please specify the electronics used...

Hello prashant_rc,
                        I want to start with RC but can't decide where to start?
Should i start with a simulator???
If yes, then which one Tx should i buy that can be used  with plane also?

Thanx

Rajeev

Rajeev,
Purchase Turnigy 9 channel or flysky 9 channel as that can be configured with any settings being computer radio.

If you want to start with low budget, you just invest 200-400 for a analog joypad and try with FMS. of course select model unbreakable for your first time and try landing. This is just to make reflex needed for flying with vision.

Or you may invest Rs.1000/- appx for simulator.
For the items search RCBAZAAR or RCHobbyAddict.

Hi Manu,
power system in this plane,

830 KV brushless motor (lots of good thrust)
10 x 5 prop
30 amp ESC
1600 mAH  lipo, Zippy
9 grams servos   x3

Hi
Do you have any design or plan so that we can build it?

Hi prashant,

where did you procure the foam sheet from , pls suggest
i am about to start my first build

sharath

Hi i am ashish i want to build an rc plane so please help me
if any one has plan please tell me

my new coropalsat plane cessna 172

Good build.. Keep it up

Hi....
Prashntbhai I am hemal from surat. You might remeber me. i have completed my COROstang with combination of balsa and coroplast. How do I sentd you pics of that?