Hi everyone.
I'm planning to build Pilot QB20 H by Pilot OK Models in Corro.
Expecting an AUW~1200-1300 gms.
I have this nose wheel assembly with me:
http://www.hobbyking.com/hobbyking/store/__43265__Sprung_Steering_Nose_Wheel_Assembly_For_46_60_Class_Models.html

Need help figuring out how to mount this

http://www.rcindia.org/electric-planes/scout-15-adapted-to-corro-electric/

Reply # 2 & 6

http://www.rcindia.org/electric-planes/skyphonic-adapted-to-corro-and-electric-25293/

Reply # 3 & 4

http://www.rcindia.org/gas-glow-nitro-planes/new-build-piper-cherokee-40-sport-scale-for-2015-sweepstakes/25/

Reply # 49

Thanks Sanjay Sir
I build primarily in Corro and built the Junior 100 last from your builds
Infact Maahin taught me to build and fly

@Sanjay Sir
Will a 9 gm analog metal gear servo be able to steer using cycle spokes?
I'm thinking to use separate servos and mix them because I don't have pushrods that long.

Quote from: ayushverma on July 13, 2016, 06:36:48 PM
Thanks Sanjay Sir
I build primarily in Corro and built the Junior 100 last from your builds
Infact Maahin taught me to build and fly

Ha! Wonderful!

But Maahin is currently in Bangalore, and you are in Indore

We were both in the same college (MIT Manipal)
I'm still studying.
I'm 2 years younger to him

Will a 9 gm analog metal gear servo be able to steer using cycle spokes?
I'm thinking to use separate servos and mix them because I don't have pushrods that long.

Yes, you could mix 2 X 9 gm MG Servos. Not even mix, use a Y cable. But check actually, you may have to reverse one servo

Or, to keep it simple, make it a taildragger

See http://www.rcindia.org/electric-planes/pilot-qb-20-l-ii-adapted-in-corro-electric/

and

http://www.rcindia.org/electric-planes/zattack!!/

Quote from: ayushverma on July 13, 2016, 06:56:12 PM
We were both in the same college (MIT Manipal)
I'm still studying.
I'm 2 years younger to him

Aah, now I've placed you! Maahin shared a photo of your Junior! Nice work!

Quote from: sanjayrai55 on July 13, 2016, 06:57:17 PM
Will a 9 gm analog metal gear servo be able to steer using cycle spokes?
I'm thinking to use separate servos and mix them because I don't have pushrods that long.

Yes, you could mix 2 X 9 gm MG Servos. Not even mix, use a Y cable. But check actually, you may have to reverse one servo

Or, to keep it simple, make it a taildragger

See http://www.rcindia.org/electric-planes/pilot-qb-20-l-ii-adapted-in-corro-electric/

and

http://www.rcindia.org/electric-planes/zattack!!/

I converted the Junior 100 to a taildragger hence trying hands on a Tricycle Gear now

Quote from: sanjayrai55 on July 13, 2016, 06:58:16 PM

Quote from: ayushverma on July 13, 2016, 06:56:12 PM
We were both in the same college (MIT Manipal)
I'm still studying.
I'm 2 years younger to him

Aah, now I've placed you! Maahin shared a photo of your Junior! Nice work!

Haha Thanks