A @ meter span combat wing... I designed it for speed and agility

This is hotwired out of eps foam and covered with monokote. ... an better alternative to foam covered with tape. The adhering of the monokote without damaging the foam required some experimentation with the iron temperature settings, but very much doable.

Airfoil PW 1211 ..

2207 2300kv quad motor turning a 5x5x3 prop,  2x9gm servos, 30A esc, .. flies with 3S molicell Li-Ion

Superb flyer..

The flight video link... 

Happy flying


 

here are the dimensions for hotwire cutting of the foam.. i.e The wing blank and the cord of the PW1211 cutting templates

The elevons are 3mm balsa covered with monokote with the dimensions as 1)length = 38cm, 2)tip cord 4.5cm, 3)root cord 1cm.. with a straight taper . They are in addition to the dimensions attached.