Was really eager to fly but not ready to build a full scale plane  , so decided to just make something quick, did not turn out too bad and the flying characteristics are awesome. No plans as such but if anybody wants to build a similar one, i am ready to send you drawings and ideas on possible setbacks 

Some more pictures, running the only power setup i have. :-D
2200 mah battery
30 amp esc
1000 kv turnigy aerodrive motor
10x4 prop

@teamnamibia

that could be a pusher setup , i mean prop and motor will be much batter place

pls check lose connection on aileron , pic 0058

please take it as a suggestion ,  its all your design go with it.

over all  i like your  airplane , good job and best off luck for flying.  

so keep calm and carry on thats the spirit ......

Wingman you r on building spree:)))

Wingman add coro doubler in side the fuse side walls

Hi Wingman,

Well, was actually intended to be a pusher, but decided not too for 2 reasons

1. The stick i used is quite heavy dense wood, hence it would be a nightmare trying to balance the CG of the plane whilst keeping the AUW as low as possible.

2. As you can see, i am using a 10 inch prop, i was trying to avoid the hassle of making a secure motor mount just behind the wing, did not have much time to think of ways of securing a high stable mount.

Thanks for the suggestions, will be making a pusher setup of this as soon as i buy smaller props and use my high speed motor in conjunction.

Keep Calm, and fly on. :-)