Thank you Iyer sir

Believe me when I say my total spend (without electronics & Landing Gear) on a model like this is less than 600 Rs.

After crashing I recycle the parts 

Rivets, glad you noticed them. I didn't    Unless you meant the 6 mm long Self Tapping Screws holding the windscreen (which is cut out from an Indigo Air drinking water glass  ) to the 6 mm balsa base plate, which is black because I covered with coloured tape

Someone PMd me as to how I got full size plans

1. Why PM? Put it on the forum; someone else too might have the same query
2. If you read some of my earlier posts this has been answered before
3. Go to a big photocopy shop - the type who have A0 A1 printer/plotters, normally do Engineering/Architectural drawings. The rate in my place is Rs. 80.
4. Please don't ask where I got the plans. Take your plan in a pen-drive in a .pdf format and ensure printing at 100% size

Sanjay sir... Thank u for ur words... I won't do pm here after...

Hey Dev, you are always welcome! Jut ensure Personal Messages are of a personal nature 

Once more a beautiful model sir.

Awesome work sir.

Awesome Sanjay sir Beautifully done!

Sanjay sir excellent build
Sir how to make cuttings in formers  I want to know whether it is with jigsaw motor driven or hand driven

Quote from: sundaram on June 12, 2015, 01:29:56 PM
Once more a beautiful model sir.

Thank you Colonel! Now come and fly it while it is still fresh 

Quote from: satz flying on June 12, 2015, 03:08:37 PM
Awesome work sir.

Thank you Satz 

  Vishal. Now if only I had your flying skills....

Beautiful model as usual

Thank you Prashant

To cut the inside holes/rectangular openings in the formers, I first drill holes in the corners of the opening to be cut. Then either I use a coping saw, or small circular saws on a Dremel or flexible shaft grinder. Finish off with a file

Thank you Ashok-ji. Now that the sweepstakes are here, I am really looking forward to your builds, to see how a master does it! 

WOWWW.... as usual what a superb build... in await for the maiden videos... can we share these pics on our facebook page?

regards
Sujju

Thanks Sujju. I'm honoured

Sir your patience while working on a model is great 
Also landing gear for models are readymade or made from aluminium

Both - readymade and aluminum (an Alloy)   

See this - http://www.rcbazaar.com/product.aspx?productid=1177

Available also at RCD & HK

Good till 1.6~ 1.7 Kg models (25 size)

Ugghhhh!! The worst build I've ever seen (being sarcastic)
What to do, you have blowed up my mind leaving only such words.

Thanks Nitesh (I think  )

Last pics before maiden

Where is Calvin?

I used a Balsa spar 

No maiden possible today - Gale force winds 

Beautiful Build as usual sir. Waiting for Maiden.
Personally, I feel the thick fuse looks very good.

superb build sir I love the colour scheme

Maahin, thanks! But you said the fuse had to go on a diet........