RC India

Have made a couple of QB 20 Low Wingers - one of my favourite models. Decided to try out a shoulder winger, with a full 4 mm wire landing gear
Plans available on outerzone.co.uk

Specs:

(http://s25.postimg.org/a53c8ll4v/20150712_111628.jpg)

Am trying to keep the weight to about 1.3 Kg, and will use a TGY 3536-1250, with 40 A ESC, 10*6 or 10*7 prop, 3000-3300 3S LiPo.

(http://s25.postimg.org/5kh5to1fj/20150712_111604.jpg)

(http://s25.postimg.org/v4jg03mtb/20150712_184900.jpg)

(http://s25.postimg.org/6gmu0lpvj/IMG_20150714_172127_HDR.jpg)

(http://s25.postimg.org/w0p471b9b/IMG_20150714_195145_HDR.jpg)

(http://s25.postimg.org/6j6pnftj3/IMG_20150714_195208_HDR.jpg)

(http://s25.postimg.org/w4ixnagqn/IMG_20150715_070540_HDR.jpg)

(http://s25.postimg.org/vt1haj0an/IMG_20150715_164446_HDR.jpg)

Wire Landing Gear Block

(http://s25.postimg.org/lk904pc8v/IMG_20150715_070546_HDR.jpg)

(http://s25.postimg.org/5na87zjun/IMG_20150715_170653_HDR.jpg)

Battery & ESC compartments separated by a 4 mm crutch

(http://s25.postimg.org/anc9toev3/IMG_20150715_170648_HDR.jpg)

Guide Tube for nosewheel pushrod

(http://s25.postimg.org/mqhlh8pxb/IMG_20150715_164451_HDR.jpg)

(http://s25.postimg.org/tuzeq9x6n/IMG_20150715_164455_HDR.jpg)

(http://s25.postimg.org/hhmkjd7i7/IMG_20150715_170623_HDR.jpg)

WING

(http://s25.postimg.org/wg4zdsmkf/IMG_20150716_072951_HDR.jpg)

(http://s25.postimg.org/riresoklb/IMG_20150716_072958_HDR.jpg)

(http://s25.postimg.org/b57f9j4fz/IMG_20150716_124850_HDR.jpg)

(http://s25.postimg.org/g7or4bdq7/IMG_20150716_121420_HDR.jpg)

Spar is 10 mm Balsa, wing is 3 mm Corro

(http://s25.postimg.org/4xw19d8ov/IMG_20150716_181539_HDR.jpg)

Received the motor yesterday - HK Registered air mail in less than 2 weeks  ;D ;D

Maiden next weekend for sure  8)

Progress

(http://s25.postimg.org/eqvbmky7z/IMG_20150719_122557.jpg)

(http://s25.postimg.org/fuffyjiv3/IMG_20150719_111951.jpg)

(http://s25.postimg.org/pt0el0san/IMG_20150719_111944.jpg)

(http://s25.postimg.org/5bk1n45kv/IMG_20150719_122544.jpg)

(http://s25.postimg.org/uvmbtjqyn/IMG_20150719_111955.jpg)

(http://s25.postimg.org/uww9myssf/IMG_20150719_122539.jpg)

(http://s25.postimg.org/okh4d4pq7/IMG_20150719_162612.jpg)

Surprising - 120 views, but 0 comments  ??? ??? :o

Well, another masterpiece is on its way  {:)}

great work

nice build   :thumbsup:

Yay! I got comments  :D

Thanks Sandeep, Satish, Bunty

Showing off my new Control Throw Deflection gauge  ;D

(http://s25.postimg.org/92y7n68n3/IMG_20150720_121446.jpg)

Ready for some Vinyl decoration

(http://s25.postimg.org/cccmtmwqn/IMG_20150720_192734.jpg)

(http://s25.postimg.org/nnfai03lr/IMG_20150720_192757.jpg)

A real beauty Sanjay sir  :thumbsup:

Thanks Vishal

 {:)}like the color combination blue prop. cover and upper area. very neat and clean construction really inspiring. :thumbsup:

Thank you Bunty

Ready for maiden

(http://s25.postimg.org/m3ejxcklb/IMG_20150721_194534.jpg)

(http://s25.postimg.org/7ziooyddr/IMG_20150721_194630.jpg)

(http://s25.postimg.org/byfw7s20v/IMG_20150721_194648.jpg)

(http://s25.postimg.org/dc7j331a7/IMG_20150721_194609.jpg)

(http://s25.postimg.org/a2t3wmd6n/IMG_20150721_194544.jpg)

wow.... that's a beauty.......

You leave me speechless every single time.

How nice Sanj. Too good.  

What have you used for the decals?

Is it packaging tape or sticky trim?

Also I can see  you strengthened the bottom of the Coro Fuselage with bamboo BBQ sticks... very innovative indeed.

BTW where did you buy the vented prop spinner from? Was it HK??  I could do with ordering a couple of those!

Also do let us know how the wire undercarriage fare? You have always used aluminium ones in the past.. Are the from HK too??

How long did it take you Sanj; start to finish?

Thank you Jayant, Nitesh, Dee

Dee, I use Vinyl Sign tape for decor. The entire build takes me about 20-24 hours

Quote from: sanjayrai55 on July 22, 2015, 05:07:29 PM
Thank you Jayant, Nitesh, Dee

Dee, I use Vinyl Sign tape for decor. The entire build takes me about 20-24 hours

Thanks Sanj..

Now that is amazing speed...No one can beat that I am sure..  It takes me months..as I only get to spent 3 hours every Friday...

Sanjay sir models are inspirational, making a model with all decals in 24 hours time is awesome speed, i know it takes lot of hardwork. Superb build sir.   :salute:

For landing gear, have u used steel spring wire or cycle spoke, and sprung nose wheel assembly

Regards
Prashant

24 hours is a long time, when working 2-3 hours a day!

For landing gear I bent 4 mm Spring Steel wire into shape. I got some nose gears built by a spring manufacturer based on a sketch I gave them. Could have bent them myself, but he had proper machines and heat treatment facilities

Beautiful Build Sanjay Sir!

Thanks Maahin. It flies well  ;D

Will take a video tomorrow

On the field

(http://s25.postimg.org/5z6uc3j9b/P1040117.jpg)

(http://s25.postimg.org/utqc6643j/P1040115.jpg)

(http://s25.postimg.org/4a2chrsxr/P1040116.jpg)

Flying Video

https://youtu.be/b-KBvcwqOgE (https://youtu.be/b-KBvcwqOgE)

This concludes this Sweepstakes Entry

 {:)} nice flying sir. :thumbsup:

Thank you Jana  8)

well done sir!!!
awesome!!

 :thanks: Prabal

that was a very good model .

 :headscratch: :headscratch:

Very nicely finished Sanj.... How does it fly??

Thanks Dee. Flies rock solid - check out the video

Wow very good flyer too as you said on the phone too you did not even have to trim the model.... This will be the next one on building board for me.
Thanks Sanj...

Nice stable flying sir,  {:)}.  
sir need some tips how to achieve straight taxing on ground

Prashant, firstly you need to have some steering - either a steerable nose or tail wheel. Then, do not give too large stick inputs. You can practise while taxying.

That's one beautiful model Sanjay Sir. How did I miss it in the first place. Awesome super likes.

Thanks so much Colonel  :thanks:

Hello Mr Sanjay. this is really beautiful model.
with 3536-1250 motor, 10 X 7 prop, 40-50A ESC, 10 gm MG Servo, 19 gm MG Servo, which other parts u have used. like hinges, push roads, landing gears, etc. step by step making will help all members who are interested in making similar model. 

also, do u suggest similar product with any local dealer.

1. It seems from your questions you have never built a corro model. Do not start with this - it needs advanced skills both in building and flying
2. Regarding Landing Gear etc. I suggest you read through the thread again.
3. For me to get a Corro model from a local dealer is not only offensive, it is the precise antithesis of why I build them

ha sanjay ji ur right. i want to try it first time. but as u said this model will be difficult for me, can u suggest any other coro model for new user.

Do a search for Avispad on this forum. You will find all the information you need. And, please open another thread for these kind of queries

Or you can also build the corro pusher trainer by extremesports on rcgroups.

Still flying  ;)

And still having fun  >:D >:D. Vid this morning

(watch in HD 720)

https://youtu.be/LyP9ZIxg3lc