Hi everyone I am building my new park flyer which is a piper cub material I am using is Coro sheet for
Fuselage construction and ordinary packing thermocol for wing construction, I assume weight of the plane is around 350 -400 grms , plan is taken from outerzone . i am trying to use my own handmade wooden propeller for this plane , earlier test on the propeller showing it create some vibration as it is very difficult to maintain equal pitch on both side , I am trying to improve the quality of my wooden prop .i am mango wood for the propeller

plan on the screen scale to 40 percent size and copy on the paper

Seems an interesting project, good luck 

What will be the other specifications (besides weight)

Sir ji i am using 1780kv motor ,2s900 mah lipo battery, two 9grm servo, and a 40 amp esc because
Its heavy ,so adding some nose weight , if it will be to heavy i will replace it with 18 or 20 amp esc , measurements are in the pictures

wings

piper cub is having plain wing area underside the wing , but i am trying the wing profile of the skysurfer .copy the wing profile on paper and glue it on the both side of thermocol .

Good going!

http://www.rcindia.org/electric-planes/wings-of-thermacol/msg272654/#msg272654

Thanks prabal
Kantesh very beautiful design please show some more information about your construction
I am using bamboo spar on the the upper and the lower surface and finally 3" packing tape for reinforcement .

I made this

See this

Use wooden

thanks prabal

very nice build kantesh  

lamination with 3" packing tape

use a hotwire for the wings.
Gives better results

Tell me specifications of ur wings only like waight and size

Around 95 cm span and 14 cm chord.
It's styrofoam so weight would be around 100 gms for the wing with the tape. Add some more for the spar.

I also made winds 40x6 inch and waight is 130gram

Yes we are getting very nice finish if we are using hot wire cutting , but i hand carved the wing
Anybody have some idea about the technical detail of the wing profile and performance of the skysurfer wings because i copy it in my piper cub wing.