HEllo rcindia, with great help from VC sir and i bought coro sheets for free and already building the fusealage.this is my first time and many mistakes too!

keep doing . . .

"Bought coro sheets for free........." 

All the best!

UMM..completed this much.

 

4mm is better

VC sir,
i just updated my motor to this one.as everybody suggested me to go with a more powred motor.
http://www.rcbazaar.com/products/1478-odin-2836-kv1000-thrust-1000-gms.aspx

What is your airframe weight and the wing dimension (Cord and span) ?
I Think the motor will be overpowered if your AUW is about 700-800 gm.
You may consider 2822 or DT700 or donky3007, bell type motors.

Yes sir i have an emax 2812.Sir really .what a fool iam  :banghead:i just ordered it from rc bazaar.what shoild i do now?i am onto full avispad building like 1500mm wingspan.will it not work sir.?

VC: Even I want to buy Corro Sheets for free from you 

Yes. forgot to tell about the free coro
sheets.heres the story.
after vc sir gave me the details of coro supplier.i phoned the supplier and he asked me for what reason did i need them. i said i wanted to make a good plane outta it.next he asked me if i was a college student and said yes(though iam in 12th!! )and alas, he siad he would give me 2 sheets 6*6 size of any thickness.hats off to that man and vc sir.vc sir had already told me that he is a very helpful person.and i dont think he would give them for free the next ime i meet him!!!!!        

BTW.my fuselage in 4mm.and wings 2mm.is that sufficient?

 

some more.please the senior members who have made this please give suggestions
regards,
kartik

ne suggestions on tail wheel?

May be completed with in today what says KC!!!

howz it guys?

The airframe looks good.

For your future builds you should have the coro for the wing aligned in such a way, that the flutes run parallel to the chord and not spanwise(which is what you have done in this case). This will ensure a smooth leading edge and will prevent formation of sharp crease marks, where instead of a smooth curve you get discrete changes in slope.

Secondy, I hope you don't have too much dihedral in the wings because it will be counter productive if you plan to use ailerons, you will always have to fight it throughout the flight. The plane will be inherently stable in the roll because you have the wing over the fuselage; 'keel effect' .

thnk u for replying.yes i think dehedral is a bit more angular and is it neccessary to use ailerons?

No, it is not necessary to use ailerons initially. You may implement it later.

okay so i have only the elevator and the rudder.

guys i just burnt my esc.!!!!!!!!!!

I wouldn't fly with that wing joint. It could come undone.

Needs wood reinforcement on the spar centre, and wrap on the outside (use 2 mm Corro)

As Rohit said above, in Corro wings, the flutes run perpendicular to the spar

Check spadtothebone

Great build nonetheless, keep on spadding! You are doing just dandy!

Quote from: kartikmadhira on November 02, 2012, 03:10:10 PM
guys i just burnt my esc.!!!!!!!!!!

How buddy ?