A cute little plane built from home made 3 mm depron/dollar tree foam (normal foam sandwiched between plan on one side and drawing paper on other side).

Fuse, wings, stabilizers, wheel pants completed.

Auw around 150gm. got all the electronics apart from the 250 size BL motor..

any help with getting the motor!! 

hi

Is this the one you are building http://flitetest.com/articles/ft-mini-speedster-build

http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=100_93&products_id=1693

Do you have rest of the electronics ?

QuoteRECOMMENDED ELECTRONICS

All In One Electronics Kit: Lazertoyz - FT MINI POWER/ELECTRONICS PACK

MOTOR (Option 1) -  EMAX MT1804 2480KV Brushless Motor

MOTOR (Option 2) - RTF Mini Motor X2204 v2 2300KV

4 Servos (Option 1) - Towerpro SG50 5g Micro Servo

4 Servos (Option 2) - HXT500 6.2g / 0.6kg / .08sec Micro Servo

ESC (Option 1) - Dynam - Dectrum 12Amp ESC w/ 3A BEC

ESC (Option 2) - Suppo 10A Brushless ESC

Battery (Option 1) - Turnigy nano-tech 460mah 2S 25~40C Lipo Pack

Battery (Option 2) - Turnigy nano-tech 460mah 3S 25~40C Lipo Pack

Battery (Option 3) - Turnigy 800mAh 2S 20C Long Lipo Pack

Prop (Option 1) - Direct Drive HQ Prop - 6x3 Black

Prop (Option 2) - Direct Drive HQ Prop - 6x4.5 - Black

http://www.quadkopters.com/product/brushless-motors/micro-1804-2400kv-brushless-motor-ccw/
http://www.quadkopters.com/product-category/mini-motors/

Hi sahil.
Yes, that's the link which I am making.
I do have all the parts except the motor from my previous builds.

And thanks for the link..

no problem, some data and tests done on RCX/ZMR 1804 2400kv motors sold buy quadkopters

http://www.rcgroups.com/forums/showthread.php?t=2168757

from where would you buy those nano tech batteries?

you can get those avionics mini motors
nice build.

@ Harshit. its not necessary to be precise on the recommendation !! you can change with any similar components.. like i am going to use Wolfpack 500mah 25C 7.4V.

@Nitesh- thanks

with canopy.

Nice built. ..

A neat build    All the best.

Thanks Taitil & Shijin 

Engine details and landing gear with wheel pants installed..

That's a really nice plane. Please do post a flight video once you fly. I wanted to ask how difficult this build would be for a complete noob to scratch builds and planes in general. I want to build a small plane soon and I was considering the FT Mini series since I do not have a lot of space to fly. Would you recommend this plane for me?

Hi SK.

This is a easy build and easy to fly plane. you can go for it. Though its not a high wing trainer model still the dihedral wings will give the stability. i will upload the video soon.

Thank you  . I will definitely try to build it once I find some Depron sheets.

You can also build the scaled down version of the blubaby 24

I prefer the FT Mini series since I can use the same electronics (power pod) for multiple planes. Anyway, I will only start in a couple of months since I used up my budget on my quadcopter.

You can use those elecs in another build too.

Blubaby is a better one for beginners.

I will ask FT whether they are coming with a beginners mini.

@johny cam you tell me the material you is it depron or bio foam and is the weight of plane increased by laminating it with paper sheets both side and how mm sheet did you used

Awesome build, I just love the feeling of a building a beauty from scratch.
keep up the good work!

Btw, what color scheme are you planning?

@Harshit

This is home made Dollar tree foam board you can say 
Normal foam sliced with DIY  foam cutter, little less than 3mm covered with drawing sheet on one side and the plan printed on a copier paper is on other side glued with diluted Fevicol.

Thanks @ controlflyer
Will keep it white.

is same mm sheet can be used with other planes of flight test, and where did you got dollar tree foam
and is this plane good for learning flying i crash so much that my every plane after one or two take off's becomes a piece of scratch foam